求批处理在工业电脑DOS里32位程序转换64位程序的命令

szqever

小弟刚开始接触，不懂，哪位大侠给个批处理命令呗！！！！！！感谢！！！！！
这是一个在工业电脑DOS里32位程序转换64位程序的命令，要求如下：
1.想全程显示DOS命令窗口
2.进入 D:\OE\DataManager
3.运行 DMToolCmd.exe –convertdb D:\BIT\(这个里面的文件较多，需要一个一个手动输入文件名)
4.接着会显示有没有转换成功
5.加入不想转换输一个字符退出

for_flr

1. @echo off
   
2. cd /d D:\OE\DataManager
   
3. :loop
   
4. echo;输入待处理路径，进行批量转换
   
5. set /p path=:
   
6. if /i "%path%"=="q" exit/b
   
7. if not exist %path% echo;路径有误&goto loop
   
8. for /f "delims=" %%a in ('dir /b /s %path%') do (
   
9. DMToolCmd.exe –convertdb %%a
   
10. )
    
11. pause

复制代码

szqever

回复 2# for_flr

大侠你好，请教一下：这个DMToolCmd.exe –convertdb <path-to-process-program>\<process-program-name.set>命令是在D:\OE\DataManager里面的。
我看到好像没有路径，谢谢大哥。

szqever

IMPORTANT: The following steps must be performed on 32-bit Platform.
1. Upgrade the DataManager to 10.2.X or later
(DMToolCmd.exe is available only in 10.X.X version onwards)
2. Open a Command Prompt (press Windows key or CTRL + ESC &#61664; Type cmd &#61664; ENTER)
3. Type D: and navigate to D: DRIVE
4. Type cd oe\Datamanager – navigates to DataManager folder as below:
5. Type the conversion command following the below usage:
DMToolCmd.exe –convertdb <path-to-process-program>\<process-program-name.set>
For example:
DMToolCmd.exe –convertdb D:\oe\ProcessPrograms\9.16.3.0-Recipe.set
6. After successful conversion, the following message will be displayed
Scanning folder < path-to-process-program>\<process-program-name.set>…
Converting bondhead1.pp… (for PowerFusion Single Head & Asterion)
Converting bondhead2.pp… (for PowerFusion Dual Head)
Done: 2/2 converted.

Batcher

回复 1# szqever


test1.bat

1. @echo off
   
2. D:
   
3. cd OE\DataManager
   
4. DMToolCmd.exe –convertdb D:\BIT\1.set
   
5. DMToolCmd.exe –convertdb D:\BIT\2.set
   
6. DMToolCmd.exe –convertdb D:\BIT\3.set

复制代码

Batcher

回复 1# szqever


test2.bat

1. @echo off
   
2. D:
   
3. cd OE\DataManager
   
4. for %%i in ("D:\BIT\*.set") do (
   
5.     DMToolCmd.exe –convertdb "%%i"
   
6. )

复制代码