[文件操作] [已解决]又是循环有点乱了

smss

dir /b /a-h /s "%1" | find "manifest.xml" 1>nul 2>nul&&set /p H=输入任意字符混淆代码,按回车不混淆代码:
(for /f "delims=" %%b in ('dir /b /a-h /s "%1\*.xml"') do (set "P=%%~dpb"
cd /d "%~dp0"
copy "%%b" "%~dp0manifest.xml" 
if /i "%%~nxb"=="config.xml" (if "%H%" NEQ "" (copy "%%~dpbconfig.xml" "%~dp0config.xml")
)

if /i "%%~nxb"=="manifest.xml" (if "%H%" NEQ "" (powershell.exe -command "&{%~dp0混淆代码.ps1}")
PowerShell -exec ByPass "&'%~dp0同步后缀.ps1'" "!P:~,-1!") else (PowerShell -exec ByPass "&'%~dp0注释空行.ps1'")

if "%H%" NEQ "" (if exist "%~dp0config.xml" (move "%~dp0config.xml" "%%~dpbconfig.xml"
del "%~dp0config.xml"
attrib "%%~dpbconfig.xml" +h)
)
move "%~dp01.xml" "%%b"&attrib "%%b" +h
))1>nul 2>nul &&echo                   所有代码处理完毕||echo                   无需处理完美跳过！
复制代码

文件目录结构如下
manifest.xml文件所在文件夹下可能有config.xml
H不等于"" 执行"混淆代码.ps1"+"同步后缀.ps1"
     等于"" 时仅执行"同步后缀.ps1"

再对其它xml(含config.xml)名称不等于manifest.xml执行"注释空行.ps1"

处理后 再移动回去 并加隐藏

@echo off
dir /b /a-h /s "%1" | find "manifest.xml" 1>nul 2>nul&&set /p H=输入任意字符混淆代码,按回车不混淆代码:
echo ---------------------------------所有manifest.xml-----------------------------------------
for /f "delims=" %%b in ('dir /b /a-h /s "%1\*manifest.xml"') do (set "P=%%~dpb"
copy "%%b" "%~dp0manifest.xml" 
cd /d "%~dp0"
if "%H%" NEQ "" (if exist "%%~dpbconfig.xml" (copy "%%~dpbconfig.xml" "%~dp0config.xml")
powershell.exe -command "&{%~dp0混淆代码.ps1}")
PowerShell -exec ByPass "&'%~dp0同步后缀.ps1'" "!P:~,-1!"
move "%~dp01.xml" "%%b"
attrib "%%b" +h
if "%H%" NEQ "" (if exist "%~dp0config.xml" (move "%~dp0config.xml" "%%~dpbconfig.xml"
attrib "%%~dpbconfig.xml" +h))
)
pause

echo ------------------------------------所有.xml-----------------------------------------
for /f "delims=" %%a in ('dir /b /a-h /s "%1\*.xml"') do (
if /i "%%~nxa" NEQ "manifest.xml" (copy "%%a" "%~dp0manifest.xml" 
cd /d "%~dp0"
PowerShell -exec ByPass "&'%~dp0注释空行.ps1'"
move "%~dp01.xml" "%%a"
attrib "%%a" +h
))
pause
复制代码

miqilaosu

回复 1# smss


    说实话，你的逻辑我有点没看明白
你代码第一行，%1\*.xml    是前边已经进入PHOTOSHOP目录了吗，*.xml这种文件不说其它就单单PS目录本身都会存在几十个

还有第3行复制，%%d得到的可能都是其它的*.xml，，如果有100个*.xml文件会来回覆盖执行，也就是说你的*.xml可能被换成了未知文件

如果第一行搜索直接搜索"CSXS\manifest.xml"，然后得到的%%~dpbconfig.xml  进行判断会好一些，其实这也有漏洞就是其它文件夹如果有manifest.xml也会出错,估计还要加一些判断才行

if exist "%%~dpbconfig.xml" 
复制代码

smss

回复 2# miqilaosu
是拖拽获取路径

cd "%1"
for /f "delims=" %%b in ('dir /b /a-h /s "*.xml"') do (set "P=%%~dpb"）
复制代码

for /f "delims=" %%b in ('dir /b /a-h /s "%1\*.xml"') do (set "P=%%~dpb"）
复制代码

就不用CD到目录下了，有时会出错 用"%~dp1%~n1"更加准确点

miqilaosu

回复 3# smss

setlocal enabledelayedexpansion
set /p H=输入任意字符混淆代码,按回车不混淆代码:
for /f "delims=" %%b in ('dir /b /a-h /s /o:n "%1\*.xml"') do (set "P=%%~dpb"
cd /d "%~dp0"
	if exist "%%~dpbmanifest.xml" (
		if exist "%%~dpbconfig.xml" (
			if "%H%" NEQ "" (
			xcopy "%%~dpbmanifest.xml" "%~dp0"
			xcopy "%%~dpbconfig.xml" "%~dp0"
			powershell.exe -command "&{%~dp0混淆代码.ps1}"
			PowerShell -exec ByPass "&'%~dp0同步后缀.ps1'" "!P:~,-1!"
			move "%~dp0%%~nxb" "%%b"&attrib "%%b" +h
			del "%~dp0config.xml"
			attrib "%%~dpbconfig.xml" +h
			)
		) 
	) else (
	robocopy  "!P:~,-1!"  "%~dp0\" "%%~nxb" /xf config.xml
	PowerShell -exec ByPass "&'%~dp0注释空行.ps1'"
	move "%~dp0%%~nxb" "%%b"&attrib "%%b" +h
	)

)1>nul 2>nul &&echo                   所有代码处理完毕||echo                   无需处理完美跳过！
pause
复制代码

smss

回复 4# miqilaosu
还是不行 感觉应该再写个循环来获取*.xml中的manifest.xml

@echo off
for /f "delims=" %%a in ('dir /b /a-h /s "%1\*.xml"') do (for /f "delims=" %%b in ('dir /b /s "%%~dpa\*manifest.xml"') do (for /f "delims=" %%c in ('dir /b /a-h /s "%%~dpa\*config.xml"') do (
echo %%c
echo ---------------------------------理还乱-----------------------------------------C)
echo %%b
echo ------------------------------------剪不断-----------------------------------------B))2>nul
pause
复制代码

miqilaosu

回复 5# smss

   config.xml被执行了两次，如果else里的用这个复制方法应该可以你试试？

robocopy  "!P:~,-1!"  "%~dp0\" "%%~nxb" /xf config.xml
复制代码

这样复制的话，config.xml不能被成功复制，这种方法需要注意 \" 会被报错

smss

回复 6# miqilaosu

@echo off&setlocal enabledelayedexpansion
dir /b /a-h /s "%1" | find "manifest.xml" 1>nul 2>nul&&set /p H=输入任意字符混淆代码,按回车不混淆代码:
(for /f "delims=" %%b in ('dir /b /a-h /s /o:n "%1\*.xml"') do (set "P=%%~dpb"
echo %%b
cd /d "%~dp0"
	if exist "%%~dpbmanifest.xml" (
		copy "%%~dpbmanifest.xml" "%~dp0"
		if "%H%" NEQ "" (
			if exist "%%~dpbconfig.xml" (
				copy "%%~dpbconfig.xml" "%~dp0"
			)
		    powershell.exe -command "&{%~dp0混淆代码.ps1}"
		)
		PowerShell -exec ByPass "&'%~dp0同步后缀.ps1'" "!P:~,-1!"
		move "%~dp01.xml" "%%b"&attrib "%%b" +h
		if "%H%" NEQ "" (
			if exist "%%~dp0config.xml" (
			move "%~dp0config.xml" "%%~dpbconfig.xml&attrib "%%~dpbconfig.xml" +h	
			)
		)			
	) else (
	copy "%%b" "%~dp0manifest.xml" 
	PowerShell -exec ByPass "&'%~dp0注释空行.ps1'"
	move "%~dp01.xml" "%%b"&attrib "%%b" +h
	)

))&&echo                   所有代码处理完毕||echo                   无需处理完美跳过！
pause
1>nul 2>nul
复制代码

改成这样 现在排查

复制文本用copy 目录才能用xcopy 大体思路是对的
不过别乱改文件名 那样会导致重新排查 如

PowerShell -exec ByPass "&'%~dp0同步后缀.ps1'" "!P:~,-1!"
move "%~dp0%%~nxb" "%%b"&attrib "%%b" +h
复制代码

处理过后都会变为1.xml

move "%~dp01.xml" "%%b"&attrib "%%b" +h
复制代码