标题: [游戏娱乐] QR code generator for CMD 二维码生成器 [打印本页]
作者: neorobin 时间: 2014-11-12 23:23 标题: QR code generator for CMD 二维码生成器
本帖最后由 neorobin 于 2014-11-15 12:50 编辑
这个程序不能直接支持 Unicode, 同样不能直接支持任何双字节或多字节字符(包括汉字), 但可以用十六进制转码的方式生成包含 Unicode (或其他任何编码)字符的二维码图形.
如果数据含有UTF-8 Unicode 字符时, 在数据头部加上 BOM (\xEF\xBB\xBF) 即可.
例如:
\xEF\xBB\xBF\xE6\xB1\x89\xE5\xAD\x97
上面的代码表示中文字符 "汉字"
任何 ASCII 字符(\x00 到 \xFF)都可以用十六进制转码方式输入, 也可以用明文输入(如果可以的话), 十六进制转码用 "\x" 开头, 后跟两位十六进制.
例如: \x20 表示空格
纠错等级有4级可选: L,M,Q,H
掩码图形有 8 种可选: 0 到 7 的整数.
2014/11/15
已更正的问题: 版本20141113, 当数据中含有双引号时, 有可能导致程序退出.
测试于 Win7 64 位 及 XP 32 位- REM If you want to rewrite the registry to automatically set the console font size to 8X8 pixels, please un-remark the next line.
- REM %1 @goto :initCON
- @echo off & chcp 437 & mode 200, 200
- echo;
- echo; QRCODE.CMD
- echo;
- echo; Author neorobin -- Rewritten in CMD Batch @ Nov. 12, 2014
- echo;
- echo; Author davidshimjs -- QRCode for Javascript library
- echo; See http://www.d-project.com/
- echo; See http://jeromeetienne.github.com/jquery-qrcode/
- echo;
- echo; ---------------------------------------------------------------------
- echo; QRCode for JavaScript
- echo;
- echo; Copyright (c) 2009 Kazuhiko Arase
- echo;
- echo; URL: http://www.d-project.com/
- echo;
- echo; Licensed under the MIT license:
- echo; http://www.opensource.org/licenses/mit-license.php
- echo;
- echo; The word "QR Code" is registered trademark of
- echo; DENSO WAVE INCORPORATED
- echo; http://www.denso-wave.com/qrcode/faqpatent-e.html
- echo;
- echo; ---------------------------------------------------------------------
- echo;
- REM ************************************************************
- REM *
- REM * Main Program
- REM *
- REM ************************************************************
- REM If you want to clear some environment variables to speed up running, you can un-remark the next line.
- call :clearVars
- setlocal enabledelayedexpansion
- call :initGlobalVars
- call :quickShow
- :main.loop
- REM If the data contains Unicode UTF-8 characters, you must add the BOM data header (\xEF\xBB\xBF).
- REM set "BOM=\xEF\xBB\xBF"
- echo;
- set /p "data=Input data:"
- if "!data!"=="" goto :main.loop
- set "errorCorrectLevel="
- set /p "t=Choose a error correct level (L/M/Q/H):"
- for %%a in (L:1 M:0 Q:3 H:2) do for /f "tokens=1,2 delims=:" %%v in ("%%a") do if /i "%t%"=="%%v" set "errorCorrectLevel=%%w"
- if "%errorCorrectLevel%"=="" set "errorCorrectLevel=1"
- REM A - Auto, [0..7] - spec, else random
- set /p "mp=Choose a mask pattern between 0 and 7 :"
- if /i "!mp!"=="A" (
- set "maskPattern="
- ) else if "!mp!" geq "0" (
- if "!mp!" leq "7" (
- set /a "maskPattern = !mp:~0,1!"
- ) else (
- set "mp=r"
- )
- ) else (
- set "mp=r"
- )
- if "!mp!"=="r" (
- set /a "maskPattern = !random! & 7"
- )
- call :QRCode.makeCode data errorCorrectLevel maskPattern
- goto :main.loop
- exit
- REM ************************************************************
- REM *
- REM * Functions
- REM *
- REM ************************************************************
- :QRCode.makeCode data errorCorrectLevel maskPattern
- setlocal enabledelayedexpansion
- echo; & echo;QRCode.makeCode & echo;
- set "data=!%~1!"
- set /a "errorCorrectLevel = %~2"
- set "maskPattern=!%~3!"
- set data
- set errorCorrectLevel
- set maskPattern
- set "oQRCodeModel.dataList="
- call :_getTypeNumber TypeNumber data errorCorrectLevel
- REM If the initial size of the console is too small to display a large size QR Code image,
- REM you can un-remark the next line to auto resize the console window.
- REM call :autoResizeScr typeNumber 20
- set typeNumber
- call :QRCodeModel.addData oQRCodeModel.dataList oQRCodeModel.dataCache data
- set oQRCodeModel.dataList
- call :QRCodeModel.make oQRCodeModel typeNumber errorCorrectLevel maskPattern
- call :paint oQRCodeModel.modules oQRCodeModel.moduleCount
- endlocal
- exit /b
- REM end of :QRCode.makeCode
- REM ***
- :QRCodeModel.make oQRCodeModel typeNumber errorCorrectLevel specifiedMaskPattern
- setlocal enabledelayedexpansion
- set "oQRCodeModel.dataList=!%~1.dataList!"
- set "oQRCodeModel.dataCache=!%~1.dataCache!"
- set /a "typeNumber = %~2, errorCorrectLevel = %~3"
- set "BestMaskPattern=!%~4!"
- if "!BestMaskPattern!"=="" (
- call :QRCodeModel.getBestMaskPattern oQRCodeModel typeNumber errorCorrectLevel BestMaskPattern
- )
- title QRCODE.CMD typeNumber: %typeNumber%, errorCorrectLevel: %errorCorrectLevel%, BestMaskPattern: %BestMaskPattern%
- call :QRCodeModel.makeImpl oQRCodeModel typeNumber 0 BestMaskPattern errorCorrectLevel
- (
- endlocal
- set "%~1.modules=%oQRCodeModel.modules%"
- set "%~1.modules.defined=%oQRCodeModel.modules.defined%"
- set "%~1.moduleCount=%oQRCodeModel.moduleCount%"
- exit /b
- )
- REM end of :QRCodeModel.make
- REM ***
- :QRCodeModel.makeImpl oQRCodeModel typeNumber test maskPattern errorCorrectLevel
- setlocal enabledelayedexpansion
- set /a "typeNumber = %~2, test = %~3, maskPattern = %~4, errorCorrectLevel = %~5"
- set "dataList=!%~1.dataList!"
- set "dataCache=!%~1.dataCache!"
- set /a "moduleCount = typeNumber * 4 + 17"
- set "modules="
- set /a "iMax= moduleCount * moduleCount, iByteMax = (iMax >> 3) + ^!^!(iMax & 7), iQuadMax = iByteMax << 1"
- for /l %%i in (1 1 %iByteMax%) do set "modules=00!modules!"
- set "modules.defined=!modules!"
- echo;QRCodeModel.setupPositionProbePattern
- call :QRCodeModel.setupPositionProbePattern modules 0 0 moduleCount
- call :QRCodeModel.setupPositionProbePattern modules "(moduleCount - 7)" 0 moduleCount
- call :QRCodeModel.setupPositionProbePattern modules 0 "(moduleCount - 7)" moduleCount
- echo;QRCodeModel.setupPositionAdjustPattern
- call :QRCodeModel.setupPositionAdjustPattern modules typeNumber moduleCount
- echo;QRCodeModel.setupTimingPattern
- call :QRCodeModel.setupTimingPattern modules moduleCount
- echo;QRCodeModel.setupTypeInfo
- call :QRCodeModel.setupTypeInfo modules test maskPattern errorCorrectLevel moduleCount
- if !typeNumber! geq 7 (
- echo;QRCodeModel.setupTypeNumber
- call :QRCodeModel.setupTypeNumber modules test typeNumber moduleCount
- )
- if "%dataCache%"=="" (
- call :QRCodeModel.createData dataCache typeNumber errorCorrectLevel dataList
- )
- call :QRCodeModel.mapData modules moduleCount dataCache maskPattern
- (
- endlocal
- set "%~1.modules=%modules%"
- set "%~1.modules.defined=%modules.defined%"
- set "%~1.moduleCount=%moduleCount%"
- exit /b
- )
- REM end of :QRCodeModel.makeImpl
- REM ***
- :QRCodeModel.getBestMaskPattern oQRCodeModel typeNumber errorCorrectLevel BestMaskPattern
- echo; & echo;QRCodeModel.getBestMaskPattern & echo;
- setlocal enabledelayedexpansion
- set "oQRCodeModel.dataList=!%~1.dataList!"
- set "oQRCodeModel.dataCache=!%~1.dataCache!"
- set /a "typeNumber = %~2, errorCorrectLevel = %~3"
- set /a "minLostPoint = 1 << IMSB ^ -1, pattern = 0"
- for /L %%i in (0 1 7) do (
- call :QRCodeModel.makeImpl oQRCodeModel typeNumber 1 %%i errorCorrectLevel
- call :QRUtil.getLostPoint oQRCodeModel lostPoint
- echo;pattern: %%i, lostPoint: !lostPoint!
- if !minLostPoint! gtr !lostPoint! (
- set /a "minLostPoint = lostPoint, pattern = %%i"
- )
- )
- (
- endlocal
- set "%~4=%pattern%"
- exit /b
- )
- REM end of :QRCodeModel.getBestMaskPattern
- REM ***
- :QRUtil.getLostPoint oQRCodeModel.qrCode lostPoint
- echo; & echo;QRCodeModel.getLostPoint & echo;
- setlocal enabledelayedexpansion
- set "modules=!%~1.modules!"
- set /a "moduleCount = %~1.moduleCount, lostPoint = 0, rm = moduleCount - 1, cm = rm, m_2 = rm - 1"
- set "LEQ=-1-"
- set moduleCount
- for /L %%r in (0 1 %rm%) do for /L %%c in (0 1 %cm%) do (
- set /a "sameCount = 0, ibs = %%c + %%r * moduleCount, iqs = ibs >> 2"
- for %%a in (!iqs!) do (
- set /a "dark = 0x!modules:~%%a,1! >> (3 ^^ (ibs & 3)) & 1"
- )
- for %%L in (-1 0 1) do (
- set /a "t = %%r + %%L, t |= moduleCount %LEQ% t"
- if !t! geq 0 (
- for %%F in (-1 0 1) do (
- set /a "t = %%c + %%F, t |= moduleCount %LEQ% t"
- if !t! geq 0 if "%%L%%F" neq "00" (
- set /a "ibs1 = ibs + %%F + %%L * moduleCount, iqs1 = ibs1 >> 2"
- for %%a in (!iqs1!) do (
- set /a "sameCount += ^!(dark ^^ (0x!modules:~%%a,1! >> (3 ^^ (ibs1 & 3)) & 1))"
- )
- )
- )
- )
- )
- set /a "lostPoint += (5 - sameCount >> IMSB) & (sameCount - 2)"
- )
- for /L %%r in (0 1 %m_2%) do for /L %%c in (0 1 %m_2%) do (
- set "t=0"
- set /a "ibs = %%c + %%r * moduleCount, iqs = ibs >> 2"
- for %%a in (!iqs!) do (
- set /a "t |= 0x!modules:~%%a,1! >> (3 ^^ (ibs & 3)) & 1"
- )
- set /a "ibs += 1, iqs = ibs >> 2"
- for %%a in (!iqs!) do (
- set /a "t |= (0x!modules:~%%a,1! >> (3 ^^ (ibs & 3)) & 1) << 1"
- )
- set /a "ibs += moduleCount, iqs = ibs >> 2"
- for %%a in (!iqs!) do (
- set /a "t |= (0x!modules:~%%a,1! >> (3 ^^ (ibs & 3)) & 1) << 2"
- )
- set /a "ibs -= 1, iqs = ibs >> 2"
- for %%a in (!iqs!) do (
- set /a "t |= (0x!modules:~%%a,1! >> (3 ^^ (ibs & 3)) & 1) << 3"
- )
- set /a "lostPoint += (^!t | ^!(t - 0xF)) << IMSB >> IMSB & 3"
- )
- set /a "m_7 = moduleCount - 7"
- for /L %%r in (0 1 %rm%) do for /L %%c in (0 1 %m_7%) do (
- set /a "ibs = %%c + %%r * moduleCount, iqs = ibs >> 2, ibs += 6, lenQuad = (ibs >> 2) - iqs + 1"
- for /f "tokens=1-2" %%a in ("!iqs! !lenQuad!") do (
- set /a "lostPoint += ^!(0x!modules:~%%a,%%b! >> (3 ^^ (ibs & 3)) & 0x7F ^^ 0x5D) << IMSB >> IMSB & 40"
- )
- )
- set /a "m_7 = moduleCount - 7"
- for /L %%c in (0 1 %cm%) do for /L %%r in (0 1 %m_7%) do (
- set "t=0"
- set /a "ibs = %%c + %%r * moduleCount, iqs = ibs >> 2"
- for %%a in (!iqs!) do (
- set /a "t |= 0x!modules:~%%a,1! >> (3 ^^ (ibs & 3)) & 1"
- )
- for /L %%d in (1 1 6) do (
- set /a "ibs += moduleCount, iqs = ibs >> 2"
- for %%a in (!iqs!) do (
- set /a "t |= (0x!modules:~%%a,1! >> (3 ^^ (ibs & 3)) & 1) << %%d"
- )
- )
- set /a "lostPoint += ^!(t ^^ 0x5D) << IMSB >> IMSB & 40"
- )
- set /a "t = moduleCount * moduleCount, iQuadEnd = t / 4 + ^!^!(t %% 4) - 1"
- set /a "qStep = WORDSIZE / 4, darkCount = 0"
- for /L %%i in (0 %qStep% %iQuadEnd%) do (
- set /a "t = 0x!modules:~%%i,%qStep%!"
- for /L %%j in (0 1 %IMSB%) do set /a "darkCount += t >> %%j & 1"
- )
- set /a "lostPoint += (x = 200 * darkCount / (moduleCount * moduleCount) - 100, t = x >> IMSB, (t&-x|~t&x))"
- (
- endlocal
- set "%~2=%lostPoint%"
- exit /b
- )
- REM end of :QRUtil.getLostPoint
- REM ***
- :_getTypeNumber TypeNumber sText nCorrectLevel
- setlocal enabledelayedexpansion
- set "sText=!%~2!"
- set /a "nCorrectLevel = %~3, j = nCorrectLevel ^ 1"
- set "QRCodeLimitLength=17_14_11_7 32_26_20_14 53_42_32_24 78_62_46_34 106_84_60_44 134_106_74_58 154_122_86_64 192_152_108_84 230_180_130_98 271_213_151_119 321_251_177_137 367_287_203_155 425_331_241_177 458_362_258_194 520_412_292_220 586_450_322_250 644_504_364_280 718_560_394_310 792_624_442_338 858_666_482_382 929_711_509_403 1003_779_565_439 1091_857_611_461 1171_911_661_511 1273_997_715_535 1367_1059_751_593 1465_1125_805_625 1528_1190_868_658 1628_1264_908_698 1732_1370_982_742 1840_1452_1030_790 1952_1538_1112_842 2068_1628_1168_898 2188_1722_1228_958 2303_1809_1283_983 2431_1911_1351_1051 2563_1989_1423_1093 2699_2099_1499_1139 2809_2213_1579_1219 2953_2331_1663_1273"
- call :dataList.getLength QRCodeLimitLength QRCodeLimitLength.length
- set /a "nType = 1"
- call :strLen sText length
- set "i=0"
- :_getTypeNumber.for_i
- if %i% geq %QRCodeLimitLength.length% goto :_getTypeNumber.for_i.break
- set "nLimit=0"
- call :{} QRCodeLimitLength i QRCodeLimitLength[i]
- call :[] QRCodeLimitLength[i] j nLimit
- if %length% leq %nLimit% (
- goto :_getTypeNumber.for_i.break
- ) else (
- set /a "nType += 1"
- )
- set /a "i += 1"
- goto :_getTypeNumber.for_i
- :_getTypeNumber.for_i.break
- if %nType% gtr %QRCodeLimitLength.length% (
- call :throwError "Too long data"
- )
- (
- endlocal
- set "%~1=%nType%"
- exit /b
- )
- REM end of :_getTypeNumber
- REM ***
- :QRRSBlock.RS_BLOCK_TABLE index arrRt
- setlocal enabledelayedexpansion
- set /a "i = %~1 / 31 + 1, j = %~1 %% 31 + 1"
- for /f "tokens=%i% delims=;" %%a in ("1_26_19 1_26_16 1_26_13 1_26_9 1_44_34 1_44_28 1_44_22 1_44_16 1_70_55 1_70_44 2_35_17 2_35_13 1_100_80 2_50_32 2_50_24 4_25_9 1_134_108 2_67_43 2_33_15_2_34_16 2_33_11_2_34_12 2_86_68 4_43_27 4_43_19 4_43_15 2_98_78 4_49_31 2_32_14_4_33_15 4_39_13_1_40_14 2_121_97 2_60_38_2_61_39 4_40_18_2_41_19;4_40_14_2_41_15 2_146_116 3_58_36_2_59_37 4_36_16_4_37_17 4_36_12_4_37_13 2_86_68_2_87_69 4_69_43_1_70_44 6_43_19_2_44_20 6_43_15_2_44_16 4_101_81 1_80_50_4_81_51 4_50_22_4_51_23 3_36_12_8_37_13 2_116_92_2_117_93 6_58_36_2_59_37 4_46_20_6_47_21 7_42_14_4_43_15 4_133_107 8_59_37_1_60_38 8_44_20_4_45_21 12_33_11_4_34_12 3_145_115_1_146_116 4_64_40_5_65_41 11_36_16_5_37_17 11_36_12_5_37_13 5_109_87_1_110_88 5_65_41_5_66_42 5_54_24_7_55_25 11_36_12 5_122_98_1_123_99 7_73_45_3_74_46;15_43_19_2_44_20 3_45_15_13_46_16 1_135_107_5_136_108 10_74_46_1_75_47 1_50_22_15_51_23 2_42_14_17_43_15 5_150_120_1_151_121 9_69_43_4_70_44 17_50_22_1_51_23 2_42_14_19_43_15 3_141_113_4_142_114 3_70_44_11_71_45 17_47_21_4_48_22 9_39_13_16_40_14 3_135_107_5_136_108 3_67_41_13_68_42 15_54_24_5_55_25 15_43_15_10_44_16 4_144_116_4_145_117 17_68_42 17_50_22_6_51_23 19_46_16_6_47_17 2_139_111_7_140_112 17_74_46 7_54_24_16_55_25 34_37_13 4_151_121_5_152_122 4_75_47_14_76_48 11_54_24_14_55_25 16_45_15_14_46_16 6_147_117_4_148_118;6_73_45_14_74_46 11_54_24_16_55_25 30_46_16_2_47_17 8_132_106_4_133_107 8_75_47_13_76_48 7_54_24_22_55_25 22_45_15_13_46_16 10_142_114_2_143_115 19_74_46_4_75_47 28_50_22_6_51_23 33_46_16_4_47_17 8_152_122_4_153_123 22_73_45_3_74_46 8_53_23_26_54_24 12_45_15_28_46_16 3_147_117_10_148_118 3_73_45_23_74_46 4_54_24_31_55_25 11_45_15_31_46_16 7_146_116_7_147_117 21_73_45_7_74_46 1_53_23_37_54_24 19_45_15_26_46_16 5_145_115_10_146_116 19_75_47_10_76_48 15_54_24_25_55_25 23_45_15_25_46_16 13_145_115_3_146_116 2_74_46_29_75_47 42_54_24_1_55_25 23_45_15_28_46_16;17_145_115 10_74_46_23_75_47 10_54_24_35_55_25 19_45_15_35_46_16 17_145_115_1_146_116 14_74_46_21_75_47 29_54_24_19_55_25 11_45_15_46_46_16 13_145_115_6_146_116 14_74_46_23_75_47 44_54_24_7_55_25 59_46_16_1_47_17 12_151_121_7_152_122 12_75_47_26_76_48 39_54_24_14_55_25 22_45_15_41_46_16 6_151_121_14_152_122 6_75_47_34_76_48 46_54_24_10_55_25 2_45_15_64_46_16 17_152_122_4_153_123 29_74_46_14_75_47 49_54_24_10_55_25 24_45_15_46_46_16 4_152_122_18_153_123 13_74_46_32_75_47 48_54_24_14_55_25 42_45_15_32_46_16 20_147_117_4_148_118 40_75_47_7_76_48 43_54_24_22_55_25;10_45_15_67_46_16 19_148_118_6_149_119 18_75_47_31_76_48 34_54_24_34_55_25 20_45_15_61_46_16") do (
- for /f "tokens=%j%" %%b in ("%%a") do (
- set "_=%%b"
- )
- )
- (
- endlocal
- set "%~2=%_%"
- exit /b
- )
- REM end of :QRRSBlock.RS_BLOCK_TABLE
- REM ***
- :QRRSBlock.getRSBlocks typeNumber errorCorrectLevel listRet
- setlocal enabledelayedexpansion
- set /a "typeNumber = %~1, errorCorrectLevel = %~2"
- call :QRRSBlock.getRsBlockTable typeNumber errorCorrectLevel rsBlock
- if "%rsBlock%"=="." (
- call :throwError "bad rs block @ typeNumber: %typeNumber% /errorCorrectLevel: %errorCorrectLevel%"
- )
- call :length rsBlock "_" len
- set /a "i_m = len / 3 - 1"
- set "list="
- for /L %%i in (0 1 %i_m%) do (
- call :[] rsBlock "(%%i * 3)" count
- set /a "count_1 = count - 1"
- call :[] rsBlock "(%%i * 3 + 1)" totalCount
- call :[] rsBlock "(%%i * 3 + 2)" dataCount
- for /L %%j in (0 1 !count_1!) do (
- set "list=!list!!totalCount!_!dataCount! "
- )
- )
- (
- endlocal
- set "%~3=%list:~0,-1%"
- exit /b
- )
- REM end of :QRRSBlock.getRSBlocks
- REM ***
- :QRRSBlock.getRsBlockTable typeNumber errorCorrectLevel arrRt
- setlocal enabledelayedexpansion
- set /a "_t = %~2 & ~3"
- if %_t%==0 (
- set /a "index = ((%~1 - 1) << 2) | (%~2 ^ 1)"
- call :QRRSBlock.RS_BLOCK_TABLE index ret
- ) else (
- set "ret=."
- )
- (
- endlocal
- set "%~3=%ret%"
- exit /b
- )
- REM end of :QRRSBlock.getRsBlockTable
- REM ***
- :QRCodeModel.createData bytes typeNumber errorCorrectLevel dataList
- setlocal enabledelayedexpansion
- set /a "PAD0 = 0xEC, PAD1 = 0x11"
- set /a "typeNumber = %~2"
- set "dataList=!%~4!"
- call :QRRSBlock.getRSBlocks typeNumber errorCorrectLevel rsBlocks
- set "buffer.buffer="
- set "buffer.length=0"
- call :dataList.getLength dataList dataList.length
- set /a "im = dataList.length - 1"
- for /L %%i in (0 1 %im%) do (
- call :{} dataList %%i data
- call :QRBitBuffer.put buffer.buffer buffer.length MODE_8BIT_BYTE 4
- call :QRUtil.getLengthInBits MODE_8BIT_BYTE typeNumber len
- call :strLen data data.getLength
- set /a "data.getLength >>= 1"
- call :QRBitBuffer.put buffer.buffer buffer.length data.getLength len
- call :QR8bitByte.write buffer.buffer buffer.length data
- )
- set "totalDataCount=0"
- for %%a in (%rsBlocks%) do (
- set "t=%%a"
- set /a "totalDataCount += !t:_=&0|!"
- )
- set /a "totalDataCount_m8 = totalDataCount << 3"
- if %buffer.length% gtr %totalDataCount_m8% (
- call :throwError "code length overflow. [%buffer.length% gtr %totalDataCount_m8%]"
- )
- set /a "t = buffer.length + 4"
- if %t% leq %totalDataCount_m8% (
- call :QRBitBuffer.put buffer.buffer buffer.length 0 4
- )
- set /a "im = buffer.length & 7 ^ 7"
- if %im% neq 7 (
- for /L %%i in (0 1 %im%) do call :QRBitBuffer.putBit buffer.buffer buffer.length 0
- )
- :QRCodeModel.createData.while_true
- if %buffer.length% geq %totalDataCount_m8% goto :QRCodeModel.createData.break
- call :QRBitBuffer.put buffer.buffer buffer.length PAD0 8
- if %buffer.length% geq %totalDataCount_m8% goto :QRCodeModel.createData.break
- call :QRBitBuffer.put buffer.buffer buffer.length PAD1 8
- goto :QRCodeModel.createData.while_true
- :QRCodeModel.createData.break
- call :QRCodeModel.createBytes bytes buffer.buffer rsBlocks
- (
- endlocal
- set "%~1=%bytes%"
- exit /b
- )
- REM end of :QRCodeModel.createData
- REM ***
- :QRCodeModel.mapData modules moduleCount dataCache maskPattern
- setlocal enabledelayedexpansion
- set "m=!%~1!"
- set "m.def=!%~1.defined!"
- set "data=!%~3!"
- set /a "moduleCount = %~2, moduleCount_1 = moduleCount - 1, "^
- "inc = -1, row = moduleCount_1, bitIndex = 7, iQuad = 0, maskPattern = %~4"
- set "LEQ=-1-"
- call :strLen data data.quadLen
- set "$0=~(row+rnk)&1"
- set "$1=~row&1"
- set "$2=^!(rnk %% 3)"
- set "$3=^!((row+rnk) %% 3)"
- set "$4=~((row>>1)+rnk/3)&1"
- set "$5=(t=row*rnk,^!(t&1)&^!(t %% 3))"
- set "$6=(t=row*rnk,~((t&1)+t %% 3)&1)"
- set "$7=~(row*rnk %% 3+((row+rnk)&1))&1"
- set /a "col = moduleCount_1"
- :QRCodeModel.mapData.for_col
- <nul set /p "=%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%%BS%COLUMN: %col%/%moduleCount_1% "
- if %col% leq 0 goto :QRCodeModel.mapData.for_col.end
- set /a "t = ^!(col ^^ 6) << IMSB >> IMSB, col = t & 5 | ~t & col"
- :QRCodeModel.mapData.while_true
- for %%c in (0 1) do (
- set /a "rnk = col - %%c, ibs = rnk + row * moduleCount, lenL = ibs >> 2, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad.def = 0x!m.def:~%%a,1! & bit"
- )
- if !quad.def!==0 (
- set "dark=0"
- if !iQuad! lss %data.quadLen% (
- for %%i in (!iQuad!) do (
- set /a "dark = (0x!data:~%%i,2! >> bitIndex) & 1"
- )
- )
- for %%i in (%maskPattern%) do set /a "mask = !$%%i!, dark ^^= mask"
- set /a "SBB = dark << IMSB >> IMSB, ind = lenL + 1, lenR = iQuadMax - ind"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!m:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!m.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "m=!m:~0,%%A!!%%D!!m:~%%B,%%C!"
- set "m.def=!m.def:~0,%%A!!%%E!!m.def:~%%B,%%C!"
- )
- set /a "bitIndex -= 1, t = bitIndex >> IMSB, bitIndex = t & 7 | ~t & bitIndex, iQuad += t & 2"
- )
- )
- set /a "row += inc, t = row | moduleCount %LEQ% row"
- if %t% lss 0 (
- set /a "row -= inc, inc = -inc"
- goto :QRCodeModel.mapData.while_true.break
- )
- goto :QRCodeModel.mapData.while_true
- :QRCodeModel.mapData.while_true.break
- set /a "col -= 2"
- goto :QRCodeModel.mapData.for_col
- :QRCodeModel.mapData.for_col.end
- (
- endlocal
- set "%~1=%m%"
- set "%~1.defined=%m.def%"
- exit /b
- )
- REM end of :QRCodeModel.mapData
- REM ***
- :dataList.getLength dataList dataList.length
- setlocal enabledelayedexpansion
- if "!%~1!"=="." (
- set "length=0"
- ) else (
- set "t=!%~1!"
- set "t1=!t: =!"
- call :strLen t len
- call :strLen t1 len1
- set /a "length = len - len1 + 1"
- )
- (
- endlocal
- set "%~2=%length%"
- exit /b
- )
- REM end of :dataList.getLength
- REM ***
- :QR8bitByte.write QRBitBuffer.buffer QRBitBuffer.length QR8bitByte.parsedData
- setlocal enabledelayedexpansion
- set "buf=!%~1!"
- set "buf.len=!%~2!"
- set "pd=!%~3!"
- call :strLen pd pd.len
- set /a "im = pd.len - 2"
- for /L %%i in (0 2 %im%) do (
- set /a "num = 0x!pd:~%%i,2!"
- call :QRBitBuffer.put buf buf.len num 8
- )
- (
- endlocal
- set "%~1=%buf%"
- set "%~2=%buf.len%"
- exit /b
- )
- REM end of :QR8bitByte.write
- REM ***
- :QRCodeModel.createBytes bytes QRBitBuffer.buffer rsBlocks
- setlocal enabledelayedexpansion
- set /a "offset = 0, maxDcCount = 0, maxEcCount = 0"
- set "rsbs=!%~3!"
- call :dataList.getLength rsbs rMax
- set /a "rMax -= 1"
- set "dcdata="
- set "ecdata="
- for /L %%r in (0 1 %rMax%) do (
- call :{} rsbs %%r rsbs[r]
- call :[] rsbs[r] 1 dcCount
- call :[] rsbs[r] 0 rsbs[r].tc
- set /a "ecCount = rsbs[r].tc - dcCount, dcC_1 = dcCount - 1,"^
- "t = maxDcCount - dcCount >> IMSB, maxDcCount = t & dcCount | ~t & maxDcCount,"^
- "t = maxEcCount - ecCount >> IMSB, maxEcCount = t & ecCount | ~t & maxEcCount"
- for /L %%i in (0 1 !dcC_1!) do (
- set /a "_i = (%%i + offset) << 1"
- for %%a in (!_i!) do set "dcdata=!dcdata!!%~2:~%%a,2!"
- )
- set "dcdata=!dcdata! "
- set /a "offset += dcCount"
- call :QRUtil.getErrorCorrectPolynomial ecCount rsPoly
- call :strLen rsPoly rsPoly.getLength
- set /a "shift = rsPoly.getLength - 2 >> 1"
- call :{} dcdata %%r dcdata[r]
- call :QRPolynomial.QRPolynomial rawPoly dcdata[r] shift
- call :QRPolynomial.mod rawPoly rsPoly modPoly
- call :strLen modPoly modPoly.getLength
- set /a "ecdata[r].length = rsPoly.getLength - 2"
- set /a "j = modPoly.getLength - ecdata[r].length"
- set /a "is = j, im = ecdata[r].length - 2 + j"
- for /L %%i in (!is! 2 !im!) do (
- if %%i geq 0 (
- set "ecdata=!ecdata!!modPoly:~%%i,2!"
- ) else (
- set "ecdata=!ecdata!00"
- )
- )
- set "ecdata=!ecdata! "
- )
- set "ecdata=%ecdata:~0,-1%"
- set "dcdata=%dcdata:~0,-1%"
- set "totalCodeCount=0"
- for %%a in (%rsbs%) do (
- set "t=%%a"
- set /a "totalCodeCount += !t:_=|0&!"
- )
- set "data="
- set /a "im = maxDcCount - 1 << 1"
- for /L %%i in (0 2 %im%) do (
- for /L %%r in (0 1 %rMax%) do (
- call :{} dcdata %%r dcdata[r]
- call :strlen dcdata[r] dcdata[r].length
- if %%i lss !dcdata[r].length! (
- set "data=!data!!dcdata[r]:~%%i,2!"
- )
- )
- )
- set /a "im = maxEcCount - 1 << 1"
- for /L %%i in (0 2 %im%) do (
- for /L %%r in (0 1 %rMax%) do (
- call :{} ecdata %%r ecdata[r]
- call :strlen ecdata[r] ecdata[r].length
- if %%i lss !ecdata[r].length! (
- set "data=!data!!ecdata[r]:~%%i,2!"
- )
- )
- )
- set /a "im = totalCodeCount - 2"
- call :strlen data data.len
- for /L %%i in (%data.len% 2 %im%) do (
- set "data=!data!00"
- )
- (
- endlocal
- set "%~1=%data%"
- exit /b
- )
- REM end of :QRCodeModel.createBytes
- REM ***
- :QRUtil.getErrorCorrectPolynomial errorCorrectLength arrRet
- setlocal enabledelayedexpansion
- set "a=01"
- set /a "im = %~1 - 1 << 1"
- for /L %%i in (0 2 %im%) do (
- set "num=01!EXP_TABLE:~%%i,2!"
- call :QRPolynomial.QRPolynomial poly num 0
- call :QRPolynomial.multiply a poly a
- )
- (
- endlocal
- set "%~2=%a%"
- exit /b
- )
- REM end of :QRUtil.getErrorCorrectPolynomial
- REM ***
- :QRPolynomial.mod this e mod
- setlocal enabledelayedexpansion
- set "this=!%~1!"
- set "e=!%~2!"
- :QRPolynomial.mod.loop
- call :strLen this this.getLength
- call :strLen e e.getLength
- if %this.getLength% lss %e.getLength% (
- goto :QRPolynomial.mod.end
- )
- set /a "a = 0x!this:~0,2! << 1, b = 0x!e:~0,2! << 1"
- for /f "tokens=1-2" %%a in ("!a! !b!") do (
- set /a "ratio = 0x!LOG_TABLE:~%%a,2! - 0x!LOG_TABLE:~%%b,2!"
- )
- set "num=%this%"
- set /a "im = e.getLength - 2"
- for /L %%i in (0 2 %im%) do (
- set /a "e[i] = 0x!e:~%%i,2! << 1"
- for %%a in (!e[i]!) do (
- set /a "P = 0x!LOG_TABLE:~%%a,2! + ratio, t=(P^^P-256)>>IMSB, r=P %% 255, c = ^!r <<IMSB>>IMSB, P = (t & P | ~t & r + ((P>>IMSB ^^ c) & 255)) << 1"
- )
- set /a "ind = %%i + 2, lenR = this.getLength - ind"
- for %%A in (!P!) do (
- set /a "n = 0x!num:~%%i,2! ^^ 0x!EXP_TABLE:~%%A,2!"
- )
- set /a "H4 = n >> 4, L4 = n & 0xF"
- for /f "tokens=1-4" %%V in ("!ind! !lenR! #!H4! #!L4!") do set "num=!num:~0,%%i!!%%X!!%%Y!!num:~%%V,%%W!"
- )
- call :QRPolynomial.QRPolynomial this num 0
- goto :QRPolynomial.mod.loop
- :QRPolynomial.mod.end
- (
- endlocal
- set "%~3=%this%"
- exit /b
- )
- REM end of :QRPolynomial.mod
- REM ***
- :QRPolynomial.multiply this e multi
- setlocal enabledelayedexpansion
- set "this=!%~1!"
- set "e=!%~2!"
- call :strLen this this.getLength
- call :strLen e e.getLength
- set /a "len = this.getLength + e.getLength - 2, im = this.getLength - 2, jm = e.getLength - 2"
- set "num="
- for /L %%i in (1 1 %len%) do set "num=!num!0"
- for /L %%i in (0 2 %im%) do (
- for /L %%j in (0 2 %jm%) do (
- set /a "a = 0x!this:~%%i,2! << 1, b = 0x!e:~%%j,2! << 1"
- for /f "tokens=1-2" %%a in ("!a! !b!") do (
- set /a "P = 0x!LOG_TABLE:~%%a,2! + 0x!LOG_TABLE:~%%b,2!"
- )
- set /a "t=(P^^P-256)>>IMSB, r=P %% 255, c = ^!r <<IMSB>>IMSB, P = (t & P | ~t & r + ((P>>IMSB ^^ c) & 255)) << 1"
- set /a "lenL = %%i + %%j, ind = lenL + 2, lenR = len - ind"
- for /f "tokens=1-2" %%A in ("!lenL! !P!") do (
- set /a "n = 0x!num:~%%A,2! ^^ 0x!EXP_TABLE:~%%B,2!"
- )
- set /a "H4 = n >> 4, L4 = n & 0xF"
- for /f "tokens=1-5" %%U in ("!lenL! !ind! !lenR! #!H4! #!L4!") do set "num=!num:~0,%%U!!%%X!!%%Y!!num:~%%V,%%W!"
- )
- )
- call :QRPolynomial.QRPolynomial T num 0
- (
- endlocal
- set "%~3=%T%"
- exit /b
- )
- REM end of :QRPolynomial.multiply
- REM ***
- :QRPolynomial.QRPolynomial this.num num shift
- setlocal enabledelayedexpansion
- if "!%~2!"=="" (
- call :throwError "@QRPolynomial.QRPolynomial num:[%~2] / shift=[%~3]"
- )
- set "num=!%~2!"
- set "offset=0"
- :QRPolynomial.QRPolynomial.L1
- set /a "offs = offset << 1"
- for %%i in (%offs%) do set "num{offset}=!num:~%%i,2!"
- call :strLen num num.length
- set /a "num.length >>= 1"
- set /a "t = (offset - num.length) & (^! 0x%num{offset}% << IMSB)"
- if %t% lss 0 (
- set /a "offset += 1"
- goto :QRPolynomial.QRPolynomial.L1
- )
- set /a "im = num.length - offset - 1"
- for /L %%i in (0 1 %im%) do (
- set /a "i_offset = %%i + offset << 1"
- for %%a in (!i_offset!) do set "this_num=!this_num!!num:~%%a,2!"
- )
- set /a "shift = %~3"
- for /L %%i in (1 1 %shift%) do (
- set "this_num=!this_num!00"
- )
- (
- endlocal
- set "%~1=%this_num%"
- exit /b
- )
- REM end of :QRPolynomial.QRPolynomial
- REM ***
- :QRCodeModel.setupTypeNumber modules test typeNumber moduleCount
- setlocal enabledelayedexpansion
- set "t=!%~1!"
- set "t.def=!%~1.defined!"
- set /a "typeNumber = %~3"
- call :QRUtil.getBCHTypeNumber bits typeNumber
- for /L %%i in (0 1 17) do (
- set /a "bit = ^!%~2 & ((bits >> %%i) & 1)"
- set /a "SBB = bit << IMSB >> IMSB, "^
- "ibs = (%%i %% 3 + %~4 - 11) + (%%i / 3) * %~4, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- for /L %%i in (0 1 17) do (
- set /a "bit = ^!%~2 & ((bits >> %%i) & 1)"
- set /a "SBB = bit << IMSB >> IMSB, "^
- "ibs = (%%i / 3) + (%%i %% 3 + %~4 - 11) * %~4, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- (
- endlocal
- set "%~1=%t%"
- set "%~1.defined=%t.def%"
- exit /b
- )
- REM end of :QRCodeModel.setupTypeNumber
- REM ***
- :QRCodeModel.setupTypeInfo modules test maskPattern errorCorrectLevel moduleCount
- setlocal enabledelayedexpansion
- set "t=!%~1!"
- set "t.def=!%~1.defined!"
- set /a "data = %~4 << 3 | %~3"
- call :QRUtil.getBCHTypeInfo bits data
- for /L %%i in (0 1 14) do (
- if %%i lss 6 (
- set "r=%%i"
- ) else if %%i lss 8 (
- set /a "r = %%i + 1"
- ) else (
- set /a "r = %~5 - 15 + %%i"
- )
- set /a "bit = ^!%~2 & ((bits >> %%i) & 1)"
- set /a "SBB = bit << IMSB >> IMSB, "^
- "ibs = 8 + r * %~5, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- for /L %%i in (0 1 14) do (
- if %%i lss 8 (
- set /a "c = %~5 - %%i - 1"
- ) else if %%i lss 9 (
- set /a "c = 15 - %%i"
- ) else (
- set /a "c = 14 - %%i"
- )
- set /a "bit = ^!%~2 & ((bits >> %%i) & 1), mod = bit"
- set /a "SBB = bit << IMSB >> IMSB, "^
- "ibs = c + 8 * %~5, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- set /a "bit = mod"
- set /a "SBB = bit << IMSB >> IMSB, "^
- "ibs = 8 + (%~5 - 8) * %~5, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- (
- endlocal
- set "%~1=%t%"
- set "%~1.defined=%t.def%"
- exit /b
- )
- REM end of :QRCodeModel.setupTypeInfo
- REM ***
- :QRUtil.getBCHTypeInfo BCHTypeInfo data
- setlocal enabledelayedexpansion
- set /a "d = %~2 << 10"
- :QRUtil.getBCHTypeInfo.L1
- call :QRUtil.getBCHDigit d.digit d
- set /a "_d = d.digit - G15.DGT"
- if !_d! geq 0 (
- set /a "d ^= G15 << _d"
- goto :QRUtil.getBCHTypeInfo.L1
- )
- set /a "_ = (%~2 << 10 | d) ^ G15_MASK"
- (
- endlocal
- set "%~1=%_%"
- exit /b
- )
- REM end of :QRUtil.getBCHTypeInfo
- REM ***
- :QRUtil.getBCHTypeNumber BCHTypeNumber data
- setlocal enabledelayedexpansion
- set /a "d = %~2 << 12"
- :QRUtil.getBCHTypeNumber.L1
- call :QRUtil.getBCHDigit d.digit d
- set /a "_d = d.digit - G18.DGT"
- if !_d! geq 0 (
- set /a "d ^= G18 << _d"
- goto :QRUtil.getBCHTypeNumber.L1
- )
- set /a "_ = %~2 << 12 | d"
- (
- endlocal
- set "%~1=%_%"
- exit /b
- )
- REM end of :QRUtil.getBCHTypeNumber
- REM ***
- :QRUtil.getBCHDigit digit data
- setlocal enabledelayedexpansion
- set /a "t = %~2"
- if %t% lss 0 (
- set "_=%WORDSIZE%"
- ) else (
- set /a "t <<= 1"
- set "_=0"
- for %%i in (16 8 4 2 1) do (
- set /a "_i = ~-^!(t >> %%i) & %%i, _ |= _i, t >>= _i"
- )
- )
- (
- endlocal
- set "%~1=%_%"
- exit /b
- )
- REM end of :QRUtil.getBCHDigit
- REM ***
- :QRCodeModel.setupPositionAdjustPattern modules typeNumber moduleCount
- setlocal enabledelayedexpansion
- call :QRUtil.PATTERN_POSITION_TABLE "(%~2 - 1)" pos
- call :length pos "_" pos.length
- set "t=!%~1!"
- set "t.def=!%~1.defined!"
- set /a "L_1 = pos.length - 1"
- for /L %%i in (0 1 %L_1%) do (
- for /L %%j in (0 1 %L_1%) do (
- call :[] pos %%i row
- call :[] pos %%j col
- set /a "ibs = col + row * %~3, iqs = ibs >> 2, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!iqs!) do (
- set /a "quad.def = 0x!t.def:~%%a,1! & bit"
- )
- if !quad.def!==0 (
- for /L %%r in (-2 1 2) do (
- for /L %%c in (-2 1 2) do (
- set /a "bit = ^!(%%r & 3 ^^ 2) | ^!(%%c & 3 ^^ 2) | ^!(%%r | %%c), SBB = bit << IMSB >> IMSB"
- set /a "ibs = col + %%c + (row + %%r) * %~3, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- )
- )
- )
- )
- (
- endlocal
- set "%~1=%t%"
- set "%~1.defined=%t.def%"
- exit /b
- )
- REM end of :QRCodeModel.setupPositionAdjustPattern
- REM ***
- :{} list index vRet
- setlocal enabledelayedexpansion
- set "T=!%~1!"
- set /a "i = %~2"
- if %i% leq 0 (
- for /f %%a in ("%T%") do set "_=%%a"
- goto :{}.End
- )
- set /a "i1 = i + 1"
- :{}.Loop1
- if %i1% gtr 31 (
- for /f "tokens=31*" %%a in ("%T%") do set "T=%%b"
- set /a "i1 -= 31"
- goto :{}.Loop1
- )
- for /f "tokens=%i1%" %%a in ("%T%") do set "_=%%a"
- :{}.End
- (
- endlocal
- set "%~3=%_%"
- exit /b
- )
- REM end of :{}
- REM ***
- :[] array index vrt
- setlocal enabledelayedexpansion
- set "_="
- set /a "t=%~2 + 1"
- if "!%~1!" neq "." (
- for /f "tokens=%t% delims=_" %%a in ("!%~1!") do set "_=%%a"
- )
- (
- endlocal
- set "%~3=%_%"
- exit /b
- )
- REM end of :[]
- REM ***
- :length list delim len
- setlocal enabledelayedexpansion
- if "!%~1!"=="." (
- set "_=0"
- ) else (
- set /a "_=1+(!%~1:%~2=&0)+1+(0&!)"
- )
- (
- endlocal
- set "%~3=%_%"
- exit /b
- )
- REM end of :length
- REM ***
- :QRUtil.PATTERN_POSITION_TABLE index arrRt
- setlocal enabledelayedexpansion
- set /a "t=%~1, p=t-31"
- if %t% leq 0 (
- set "_=."
- ) else if %p% leq 0 (
- for /f "tokens=%t%" %%a in ("6_18 6_22 6_26 6_30 6_34 6_22_38 6_24_42 6_26_46 6_28_50 6_30_54 6_32_58 6_34_62 6_26_46_66 6_26_48_70 6_26_50_74 6_30_54_78 6_30_56_82 6_30_58_86 6_34_62_90 6_28_50_72_94 6_26_50_74_98 6_30_54_78_102 6_28_54_80_106 6_32_58_84_110 6_30_58_86_114 6_34_62_90_118 6_26_50_74_98_122 6_30_54_78_102_126 6_26_52_78_104_130 6_30_56_82_108_134 6_34_60_86_112_138") do (
- set "_=%%a"
- )
- ) else (
- for /f "tokens=%p%" %%a in ("6_30_58_86_114_142 6_34_62_90_118_146 6_30_54_78_102_126_150 6_24_50_76_102_128_154 6_28_54_80_106_132_158 6_32_58_84_110_136_162 6_26_54_82_110_138_166 6_30_58_86_114_142_170") do (
- set "_=%%a"
- )
- )
- (
- endlocal
- set "%~2=%_%"
- exit /b
- )
- REM end of :QRUtil.PATTERN_POSITION_TABLE
- REM ***
- :QRUtil.getLengthInBits mode type len
- setlocal enabledelayedexpansion
- set /a "_m = %~1, t = %~2, @11=10,@12=9,@14=8,@18=8, @21=12,@22=11,@24=16,@28=10, @31=14,@32=13,@34=16,@38=12,"^
- "a=t-1,b=t-10,c=t-27,d=t-41, _t = (a^b)>>IMSB&1 | (b^c)>>IMSB&2 | (c^d)>>IMSB&3"
- if %_t%==0 (
- call :throwError "ERROR type: %t%"
- ) else (
- set "_=!@%_t%%_m%!"
- )
- (
- endlocal
- set "%~3=%_%"
- exit /b
- )
- REM end of :QRUtil.getLengthInBits
- REM ***
- :throwError errInfo
- color CF
- echo; & echo; & echo;ERROR & echo; & echo; %~1
- <nul set /p "=Any key to exit..."
- >nul pause
- EXIT
- exit /b
- REM ***
- :QRCodeModel.setupTimingPattern modules moduleCount
- setlocal enabledelayedexpansion
- set "t=!%~1!"
- set "t.def=!%~1.defined!"
- set /a "_m = %~2 - 9"
- for /L %%r in (8 1 %_m%) do (
- set /a "ibs = 6 + %%r * %~2, iqs = ibs >> 2, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!iqs!) do (
- set /a "quad.def = 0x!t.def:~%%a,1! & bit"
- )
- if !quad.def!==0 (
- set /a "bit = ~%%r & 1"
- set /a "SBB = bit << IMSB >> IMSB, "^
- "ibs = 6 + %%r * %~2, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- )
- for /L %%c in (8 1 %_m%) do (
- set /a "ibs = %%c + 6 * %~2, iqs = ibs >> 2, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!iqs!) do (
- set /a "quad.def = 0x!t.def:~%%a,1! & bit"
- )
- if !quad.def!==0 (
- set /a "bit = ~%%c & 1"
- set /a "SBB = bit << IMSB >> IMSB, "^
- "ibs = %%c + 6 * %~2, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- )
- (
- endlocal
- set "%~1=%t%"
- set "%~1.defined=%t.def%"
- exit /b
- )
- REM end of :QRCodeModel.setupTimingPattern
- REM ***
- :QRCodeModel.setupPositionProbePattern modules row col moduleCount
- setlocal enabledelayedexpansion
- set "t=!%~1!"
- set "t.def=!%~1.defined!"
- set "lss=-" & set "LEQ=-1-"
- for /L %%r in (-1 1 7) do (
- set /a "_r = %~2 + %%r, SBB = _r %LEQ% -1 | %~4 %LEQ% _r"
- if !SBB! geq 0 (
- for /L %%c in (-1 1 7) do (
- set /a "_c = %~3 + %%c, SBB = _c %LEQ% -1 | %~4 %LEQ% _c"
- if !SBB! geq 0 (
- set /a "SBB = ( ( 0 %LEQ% %%r & %%r %LEQ% 6 & (^!%%c | ^!(%%c - 6)) << IMSB ) | ( 0 %LEQ% %%c & %%c %LEQ% 6 & (^!%%r | ^!(%%r - 6)) << IMSB ) | ( 2 %LEQ% %%r & %%r %LEQ% 4 & 2 %LEQ% %%c & %%c %LEQ% 4) ) >> IMSB, "^
- "ibs = _c + _r * %~4, lenL = ibs >> 2, ind = lenL + 1, lenR = iQuadMax - ind, bit = 1 << (3 ^^ (ibs & 3))"
- for %%a in (!lenL!) do (
- set /a "quad = 0x!t:~%%a,1!, quad = SBB & (bit | quad) | ~SBB & (~bit & quad), "^
- "quad.def = 0x!t.def:~%%a,1! | bit"
- )
- for /f "tokens=1-5" %%A in ("!lenL! !ind! !lenR! #!quad! #!quad.def!") do (
- set "t=!t:~0,%%A!!%%D!!t:~%%B,%%C!"
- set "t.def=!t.def:~0,%%A!!%%E!!t.def:~%%B,%%C!"
- )
- )
- )
- )
- )
- (
- endlocal
- set "%~1=%t%"
- set "%~1.defined=%t.def%"
- exit /b
- )
- REM end of :QRCodeModel.setupPositionProbePattern
- REM ***
- :paint modules moduleCount test
- setlocal enabledelayedexpansion
- if "%~3" neq "" (set /a "test = %~3") else set "test=0"
- echo;
- color 0F & echo;
- set "BLACK= " & set "WHITE=%ASCII219%"
- for %%i in (0 1 2 3 4 5 6 7 8 9 A B C D E F) do (
- set "bits="
- for /L %%j in (3 -1 0) do (
- set /a "b = 0x%%i >> %%j & 1"
- set "bits=!bits!!b!"
- )
- set "bits=!bits:0=%WHITE%!"
- set "H2B=!H2B!"%%i=!bits:1=%BLACK%!" "
- )
- echo;
- set "w_quietZone=1"
- set /a "w = %~2 - 1, w1 = w_quietZone * 2 + %~2"
- set "quietZone=" & for /L %%i in (1 1 !w_quietZone!) do set "quietZone=!quietZone!%WHITE%"
- for /L %%i in (1 1 !w_quietZone!) do (for /L %%j in (1 1 !w1!) do <nul set /p "=%WHITE%") & echo;
- for /L %%i in (0 1 !w!) do (
- set /a "ibs = %~2 * %%i, iqs = ibs >> 2, quadLen = ((ibs + %~2 - 1) >> 2) - iqs + 1, ibs &= 3"
- for /f "tokens=1-2" %%s in ("!iqs! !quadLen!") do (
- set "_t=!%~1:~%%s,%%t!"
- if %test%==1 set "t.defined=!%~1.defined:~%%s,%%t!"
- )
- for %%a in (%H2B%) do (
- set "_t=!_t:%%~a!"
- if %test%==1 set "t.defined=!t.defined:%%~a!"
- )
- if %test%==1 (
- set /a "im = (quadLen << 2) - 1"
- set "t="
- for /L %%i in (0 1 !im!) do (
- if "!t.defined:~%%i,1!"=="%BLACK%" (
- set "t=!t!!_t:~%%i,1!"
- ) else (
- set "t=!t!*"
- )
- )
- ) else (
- set "t=!_t!"
- )
- for /f "tokens=1-2" %%s in ("!ibs! !%~2!") do echo;!quietZone!!t:~%%s,%%t!!quietZone!
- )
- for /L %%i in (1 1 !w_quietZone!) do (for /L %%j in (1 1 !w1!) do <nul set /p "=%WHITE%") & echo;
- endlocal
- exit /b
- REM end of :paint
- REM ***
- :QRBitBuffer.put QRBitBuffer.buffer QRBitBuffer.length num length
- setlocal enabledelayedexpansion
- set "_b=!%~1!"
- set "_L=!%~2!"
- set /a "im = %~4 - 1"
- for /L %%i in (0 1 %im%) do (
- call :QRBitBuffer.putBit _b _L "((%~3 >> (im - %%i)) & 1)"
- )
- (
- endlocal
- set "%~1=%_b%"
- set "%~2=%_L%"
- exit /b
- )
- REM end of :QRBitBuffer.put
- REM ***
- :QRBitBuffer.putBit QRBitBuffer.buffer QRBitBuffer.length bit
- setlocal enabledelayedexpansion
- set "_b=!%~1!"
- call :strLen _b _buf_len
- set /a "_buf_len >>= 1"
- set /a "_L = %~2, bufIndex = _L >> 3, bit = %~3"
- if %_buf_len% leq %bufIndex% (
- set "_b=%_b%00"
- )
- if %bit%==1 (
- set /a "lenL = bufIndex << 1, ind = lenL + 2, lenR = (_buf_len << 1) - ind"
- for %%i in (!lenL!) do set /a "_byte = (0x!_b:~%%i,2!) | (0x80 >> (_L & 7))"
- set /a "H4 = _byte >> 4, L4 = _byte & 0xF"
- for /f "tokens=1-5" %%U in ("!lenL! !ind! !lenR! #!H4! #!L4!") do set "_b=!_b:~0,%%U!!%%X!!%%Y!!_b:~%%V,%%W!"
- )
- set /a "_L += 1"
- (
- endlocal
- set "%~1=%_b%"
- set "%~2=%_L%"
- exit /b
- )
- REM end of :QRBitBuffer.putBit
- REM ***
- :QRCodeModel.addData QRCodeModel.dataList QRCodeModel.dataCache data
- setlocal enabledelayedexpansion
- set "dataList=!%~1!"
- set "data=!%~3!"
- call :QR8bitByte.parsedData data parsedData
- if "%dataList%"=="" (
- set "dataList=!parsedData!"
- ) else (
- set "dataList=%dataList% !parsedData!"
- )
-
- (
- endlocal
- set "%~1=%dataList%"
- set "%~2="
- exit /b
- )
- REM end of :QRCodeModel.addData
- REM ***
- :QR8bitByte.parsedData str parsedData
- (
- setlocal enabledelayedexpansion
- set "ASCII_20_7E=01234567890123456789012345678901 ^!"#$%%^&'(^)*+,-./0123456789:;^<=^>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^^^^_`abcdefghijklmnopqrstuvwxyz{^|}~"
- for /L %%i in (0x20 1 0x7e) do (
- set /a "H4 = %%i >> 4, L4 = %%i & 0xF"
- for /f "tokens=1-2" %%U in ("#!H4! #!L4!") do set "hex=!%%U!!%%V!"
- if "!ASCII_20_7E:~%%i,1!"=="^" (
- set "_^=5E"
- ) else if "!ASCII_20_7E:~%%i,1!"=="*" (
- REM set _*=!hex!
- ) else (
- for %%a in ("!ASCII_20_7E:~%%i,1!") do (
- if "%%~a" lss "a" (
- if "%%~a"=="!" (
- set "_^!=21"
- ) else (
- set _%%~a=!hex!
- )
- ) else if "%%~a" leq "Z" (
- for /f "delims=ABCDEFGHIJKLMNOPQRSTUVWXYZ" %%b in ("%%~a") do set #%%~a=!hex!
- for /f "delims=abcdefghijklmnopqrstuvwxyz" %%b in ("%%~a") do set _%%~a=!hex!
- ) else (
- set _%%~a=!hex!
- )
- )
- )
- )
- REM set "_*=42" & set "_?=63" & rem * and ? are wildcard, the above code does not generate
- rem the corresponding variables, but also unnecessary
- set "t="
- call :strLen "%~1" iEnd
- set /a "iEnd -= 1, next = 0"
- for /L %%i in (0 1 !iEnd!) do (
- if %%i geq !next! (
- set "isEscape=0"
- if /i "!%~1:~%%i,2!"=="\x" (
- set /a "isEscape = 1, A = %%i + 2, B = A + 1"
- for %%n in (!A! !B!) do (
- if "!%~1:~%%n,1!"=="" (
- set "isEscape=0"
- ) else if "!%~1:~%%n,1!"==";" (
- set "isEscape=0"
- ) else (
- for /f "delims=0123456789abcdefABCDEF" %%b in ("!%~1:~%%n,1!") do (
- set "isEscape=0"
- )
- )
- )
- if !isEscape! equ 1 (
- for %%n in (!A!) do (
- set "t=!t!!%~1:~%%n,2!"
- set /a "next = %%i + 4"
- )
- )
- )
- if !isEscape! equ 0 (
- for /f delims^=^ eol^= %%j in ("!%~1:~%%i,1!") do (
- if "%%j"=="!" (
- set "t=!t!21"
- ) else if "%%j"=="*" (
- set "t=!t!2A"
- ) else if "%%j"=="?" (
- set "t=!t!3F"
- ) else (
- if "%%j"=="=" (
- set "t=!t!3D"
- ) else if "%%j" lss "a" (
- set "t=!t!!_%%j!"
- ) else if "%%j" leq "Z" (
- for /f "delims=ABCDEFGHIJKLMNOPQRSTUVWXYZ" %%b in ("%%j") do set "t=!t!!#%%j!"
- for /f "delims=abcdefghijklmnopqrstuvwxyz" %%b in ("%%j") do set "t=!t!!_%%j!"
- ) else (
- set "t=!t!!_%%j!"
- )
- )
- )
- )
- )
- )
- )
- (
- endlocal
- set "%~2=%t%"
- exit /b
- )
- REM end of :QR8bitByte.parsedData
- REM ***
- :strLen str len
- (
- setlocal enabledelayedexpansion
- set "len=0" & set "T=!%~1!#"
- for %%i in (4096 2048 1024 512 256 128 64 32 16 8 4 2 1) do if "!T:~%%i!" neq "" set /a "len |= %%i" & set "T=!T:~%%i!"
- )
- (
- endlocal
- set "%~2=%len%"
- exit /b
- )
- REM end of :strLen
- REM ***
- :QRMath.glog n vRet
- setlocal enabledelayedexpansion
- set /a "n = %~1, i = n << 1"
- if %n% lss 1 (
- call :throwError "@QRMath.glog n:[%~1]"
- )
- for %%i in (%i%) do set "ret=!LOG_TABLE:~%%i,2!"
- (
- endlocal
- set "%~2=%ret%"
- exit /b
- )
- REM end of :QRMath.glog
- REM ***
- :QRMath.gexp n vRet
- setlocal enabledelayedexpansion
- set /a "n=%~1, t = (n^^n-256)>>IMSB, r=n %% 255, c = ^!r <<IMSB>>IMSB, i = (t & n | ~t & r + ((n>>IMSB ^^ c) & 255)) << 1"
- for %%i in (%i%) do set "ret=!EXP_TABLE:~%%i,2!"
- (
- endlocal
- set "%~2=%ret%"
- exit /b
- )
- REM end of :QRMath.gexp
- REM ***
- :init.LOG_TABLE LOG_TABLE
- setlocal enabledelayedexpansion
- set "T="
- for /L %%i in (0 1 255) do set "T=!T!.."
- call :strlen T LOG_TABLE_LEN
- for /L %%i in (0 1 254) do (
- set /a "_i = %%i << 1, H4 = %%i >> 4, L4 = %%i & 0xF"
- for %%a in (!_i!) do set /a "lenL = 0x!EXP_TABLE:~%%a,2! << 1"
- set /a "ind = lenL + 2, lenR = LOG_TABLE_LEN - ind"
- for /f "tokens=1-5" %%U in ("!lenL! !ind! !lenR! #!H4! #!L4!") do set "T=!T:~0,%%U!!%%X!!%%Y!!T:~%%V,%%W!"
- )
- (
- endlocal
- set "%~1=%T%"
- exit /b
- )
- REM end of :init.LOG_TABLE
- REM ***
- :init.EXP_TABLE EXP_TABLE
- setlocal enabledelayedexpansion
- set "ET="
- for /L %%i in (0 1 7) do (
- set /a "t = 1 << %%i, H4 = t >> 4, L4 = t & 0xF"
- for /f "tokens=1-2" %%X in ("#!H4! #!L4!") do (
- set "ET=!ET!!%%X!!%%Y!"
- )
- )
- for /L %%i in (8 1 255) do (
- set /a "i_4 = %%i - 4 << 1, i_5 = %%i - 5 << 1, i_6 = %%i - 6 << 1, i_8 = %%i - 8 << 1"
- for /f "tokens=1-4" %%a in ("!i_4! !i_5! !i_6! !i_8!") do (
- set /a "t = 0x!ET:~%%a,2! ^^ 0x!ET:~%%b,2! ^^ 0x!ET:~%%c,2! ^^ 0x!ET:~%%d,2!"
- set /a "H4 = t >> 4, L4 = t & 0xF"
- for /f "tokens=1-2" %%X in ("#!H4! #!L4!") do set "ET=!ET!!%%X!!%%Y!"
- )
- )
- (
- endlocal
- set "%~1=%ET%"
- exit /b
- )
- REM end of :init.EXP_TABLE
- REM ***
- :autoResizeScr typeNumber margin
- setlocal
- for /f "tokens=1-2 delims=:" %%a in ('mode ^| find /i "s:" ^| find /i "n"') do set /a "%%a=%%b"
- set /a "moduleCount = %~1 * 4 + 17"
- set /a "sizeMin = moduleCount + %~2"
- set /a "resize = Lines - sizeMin | Columns - sizeMin"
- set /a "Lines = (t = Lines - sizeMin >> IMSB, t & sizeMin | ~t & Lines)"
- set /a "Columns = (t = Columns - sizeMin >> IMSB, t & sizeMin | ~t & Columns)"
- if %resize% lss 0 mode %Columns%, %Lines%
- endlocal
- exit /b
- REM end of :autoResizeScr
- REM ***
- :clearVars
- set "Path=%SystemRoot%\system32"
- for /f "delims==" %%a in ('set') do (
- if /i "%%a" neq "Path" set "%%a="
- )
- exit /b
- REM end of :clearVars
- REM ***
- :getBackSpaceAndASCII219
- call :getASCII219
- >nul copy 219.chr /b + 13.chr /b 219_CR.chr /b
- <219_CR.chr set /p "ASCII219="
- for %%N in (13 219 219_CR) do del %%N.chr
- call :getBackSpace BS
- exit /b
- REM end of :getBackSpaceAndASCII219
- REM ***
- :getASCII219
- setlocal
- set ^"genchr=(^
- for %%N in (13 219) do if not exist %%N.chr (^
- makecab /d compress=off /d reserveperdatablocksize=26 /d reserveperfoldersize=%%N 0.tmp %%N.chr ^>nul^&^
- type %%N.chr ^| ((for /l %%n in (1 1 38) do pause)^>nul^&findstr "^^" ^>%%N.temp)^&^
- ^>nul copy /y %%N.temp /a %%N.chr /b^&^
- del %%N.temp^
- )^
- )^&^
- del 0.tmp^"
- for %%N in (13 219) do (del /f /q /a %%N.chr >nul 2>&1)
- type nul >0.tmp
- cmd /q /v:on /c "%genchr%"
- endlocal
- exit /b
- REM end of :getASCII219
- REM ***
- :getBackSpace vRet
- for /F %%a in ('"prompt $h&for %%b in (1) do rem"')do Set "%~1=%%a"
- exit /b
- REM end of :getBackSpace
- REM ***
- :quickShow
- setlocal
- set "modules=FE44313AFBEA776CB43FC13E02CA360F524F2DD06E9322A555E5CE966FABB75A517E1715F2C11455DBAFFCAFF0EF0F878202EC13D33C414E1C672B2907FAAAAAAAAAAAAAAAAAFE0016CF14C94D13137500C7033FFF6840F897070C4AFAD29F33B324C2CD720CF14BED1585F5A250D740B3511151B0347AFE2E3766265B0A0DB73511A388221747342F4714195737584599A05A25595D295C80A8A7B45218D6E66DBEC36FB71F581718448E0C5A08A2DBEEB431751102E4886420DC5D2E6A4F2D2BA29ACD92E974F2B616CF2C7FF587F11ACC3296904AA42CE7BE107DD8C6508FF4B56DDCB643B90F2CBB87341D09514F9900660FAC6DFED9FCFF398BF8A44010C74EFAC54D29C7FAB2892A083FAB1DDCABC91C11F15E4D7142DA51F3F918FFD9D3BFF6301F852752BE76C760DC98C35549361A710C1260A0C0081BE4EDC20990F7237BBEA7ACBE31385162DB8D84F413A667BFFB315749B8B1F4BA8370F6A94A56815E2110CDFF93DB7E53992C6E54342D9FC0F9DB1487E5A6565BEFB5960896F6BD10B0853B57D1BD280DCA2CFECD5CD482ED67CF5E928D9B382490CE27B0C833E267247418C51826E8B17AA3FF7D640C69E73B3214917C84513AB7B0CE2561C173EE71289A42140369271B31F4C581D800EC0D6019DBC1CAFD6C44E2B1B8E40055EB12EB967FDBAFF8FADAF975A8FD1C7800C70AF2C418A54602B5AD6A0B40AB3FD8AA571B0811B8AFD1925AD1C3FEDE7FC6B20FACB8AFC826487C7A73A4009CD7B06DD9F6F63E732648A6566A918E4CC953435B73BDF325BECF3C37BC9FEF9820FC56DB7737759618C611AD879402D1830DB031051F423EB19D3C721B02F96FA65FCA1EB7DFD15A25AC9A463C07C45D5048879FFA6A064F00D575082C195BE3DC86D746B76CED6B748CE6086536CAE8D9B6C076B3ACF0A19CDCBBD6C8DDEFDB3B787E72F4BB8F484C94A92DF233A348FACBFD16F121C452CC8D663269EFBEFB78000EE1C9084D2DFCD820BF49B48B3A5BE10AD3C571387473D9CFFFECBEFBB54DFC805D01450672458131C53FA841AA4830ABDB546B105B19D194659146F7F1CBA2E0EFFBC3EFB6FA8F8DD108A0D6016D1D454AB2E8F29A910A060263412F05EBAF920F143B12B124FEE936636A62FCFFA49100"
- set /a "moduleCount = 17 + 4 * 16"
- call :paint modules moduleCount
- endlocal
- exit /b
- REM end of :quickShow
- REM ***
- :delReg
- setlocal enabledelayedexpansion
- set "s=!time:~-4,1!"
- :delReg.loop
- set /a "elapse = (1!time:~-4,1! - s) %% 10"
- if %elapse% lss 2 goto :delReg.loop
- >nul reg delete HKCU\Console\QRCODE_CMD /f
- endlocal
- exit /b
- REM end of :delReg
- REM ***
- :initGlobalVars
- for /l %%i in (7 8 127) do set /a "_=1<<%%i>>%%i>>1, IMSB=_&%%i|~_&IMSB"
- set /a "WORDSIZE = IMSB + 1"
- set /a "MODE_NUMBER = 1 << 0, MODE_ALPHA_NUM = 1 << 1, MODE_8BIT_BYTE = 1 << 2, MODE_KANJI = 1 << 3"
- set /a "G15 = (1 << 10) | (1 << 8) | (1 << 5) | (1 << 4) | (1 << 2) | (1 << 1) | (1 << 0)"
- set /a "G18 = (1 << 12) | (1 << 11) | (1 << 10) | (1 << 9) | (1 << 8) | (1 << 5) | (1 << 2) | (1 << 0)"
- set /a "G15_MASK = (1 << 14) | (1 << 12) | (1 << 10) | (1 << 4) | (1 << 1)"
- call :QRUtil.getBCHDigit G18.DGT G18
- call :QRUtil.getBCHDigit G15.DGT G15
- call :getBackSpaceAndASCII219
- for %%i in (0 1 2 3 4 5 6 7 8 9 A B C D E F) do (
- set /a "i = 0x%%i"
- set "#!i!=%%i"
- )
- call :init.EXP_TABLE EXP_TABLE
- call :init.LOG_TABLE LOG_TABLE
- exit /b
- REM end of :initGlobalVars
- REM ***
- :initCON
- @echo off
- for %%a in ( FontSize:00080008 FontFamily:00000030 WindowSize:00C800C8
- ScreenColors:0000000f CodePage:000001b5 ScreenBufferSize:00C800C8
- ) do for /f "tokens=1,2 delims=:" %%b in ("%%a") do (
- >nul reg add HKCU\Console\QRCODE_CMD /v %%b /t reg_dword /d 0x%%c /f
- )
- start "QRCODE_CMD" /max "%ComSpec%" /c "%~0" REM & (call :delReg) & exit
- REM end of :initCON
复制代码
作者: amwfjhh 时间: 2014-11-13 09:34
强贴……这个没专业知识搞不下来了。只有带着崇敬之心收藏用之……
作者: 523066680 时间: 2014-11-13 22:55
这个不错,以后传送链接或者文字信息到手机里面方便多了
主题类型属于 实际应用
作者: neorobin 时间: 2014-11-13 23:06
回复 3# 523066680
由于运行速度的原因, 这个真不好意思放进实际应用类
作者: 523066680 时间: 2014-11-13 23:12
本帖最后由 523066680 于 2014-11-13 23:21 编辑
回复 4# neorobin
突然想起来,也许可以生成 .svg文件,这样就是矢量图了。
不过svg的脚本描述方式要花点时间学习。
看这里
http://www.w3school.com.cn/svg/svg_rect.asp
svg矢量图 一般用浏览器能浏览到,编辑的话是coreldraw 或者 gimp/inkscape
作者: neorobin 时间: 2014-11-13 23:18
回复 5# 523066680
除了生成图形文件外, 还有一个难点 就是 直接支持 Unicode,
即使这两点都实现了, 速度还被放在了一边, 哈哈.
作者: neorobin 时间: 2014-11-13 23:21
回复 5# 523066680
针对于 QR Code, 感觉只要学会用 矩形 <rect> 好象就足够了
作者: 523066680 时间: 2014-11-13 23:22
回复 7# neorobin
恩,早点休息。年轻不养生,老了养医生
作者: amwfjhh 时间: 2014-11-14 17:25
回复 neorobin
恩,早点休息。年轻不养生,老了养医生
523066680 发表于 2014-11-13 23:22
呃,好经典的话……
作者: ads350668398 时间: 2014-11-14 18:33
Input data:1
Choose a error correct level (L/M/Q/H):1
Choose a mask pattern between 0 and 7 :1
QRCode.makeCode
data=1
errorCorrectLevel=1
maskPattern=1
TypeNumber=1
oQRCodeModel.dataList=31
QRCodeModel.setupPositionProbePattern
QRCodeModel.setupPositionAdjustPattern
QRCodeModel.setupTimingPattern
QRCodeModel.setupTypeInfo
COLUMN: -1/20
███████████████████████
█ █ ███ █ █
█ █████ █ █ ███ █████ █
█ █ █ █████ █ █ █ █
█ █ █ ███████ █ █ █
█ █ █ █ █ █ █ █
█ █████ █ █ █ █████ █
█ █ █ █ █ █
█████████ ███ █████████
█ ██ █ █ ██ ██ █
█ ███ █ █ █ ███
█ █ ███ ███ █ █ █
█ ██ ██ ██ █ █ ██
██ ██ ████ █
█████████ █████████ █
█ ███ ███ ███ █
█ █████ █ ███ ███ ██ ██
█ █ █ ███ ███ ███ █
█ █ █ ██ █ █ █ ███
█ █ █ █ █ █ █ █
█ █████ █ █ █ ███
█ █ █ █
███████████████████████
Input data:
Choose a error correct level (L/M/Q/H):2
Choose a mask pattern between 0 and 7 :2
QRCode.makeCode
data=1
errorCorrectLevel=1
maskPattern=2
TypeNumber=1
oQRCodeModel.dataList=31
QRCodeModel.setupPositionProbePattern
QRCodeModel.setupPositionAdjustPattern
QRCodeModel.setupTimingPattern
QRCodeModel.setupTypeInfo
COLUMN: -1/20
███████████████████████
█ ███ █ █
█ █████ █ █ █ █████ █
█ █ █ ███ █ █ █ █
█ █ █ █ ██ █ █ █ █
█ █ █ ██ ██ █ █ █ █
█ █████ █ ██ ██ █████ █
█ █ █ █ █ █
██████████ ████████████
█ █ ██ █ █ █ █ ██
██ █ ███ ██ ████
█ ██ ███ █ ██████
█████ ██ █ ██ █ ██
█████ █ █ █ ██ ██ ███
█████████ ███ ██ ██ █
█ █ ██ █ ██ ███
█ █████ ██ █████ █ ██
█ █ █ █ ██ █ ██ ███
█ █ █ █ ██ ██ ████
█ █ █ █ ███ █ ██████
█ █████ █ █ ██ ████
█ █ ██ ██ ██ ██
███████████████████████
Input data:
作者: neorobin 时间: 2014-11-15 12:58
版本20141113, 当数据中含有双引号时, 有可能导致程序退出.
此问题已更正, 顶楼代码已更新
作者: cjiabing 时间: 2014-11-15 22:20
复制生成的“二维码”到记事本,使用两个空格替换一个空格,即可在记事本上获得完整的二维码图形!!!~——可惜扫描不了!~黑白色互换了!~!
将生成的“二维码”抓图,使用画图工具重新调整大小,取消保持纵横比例,宽使用85,长使用50调整,就可以生成标准的二维码图标了,并且还可以扫一扫哦!~!~
作者: cjiabing 时间: 2014-11-15 22:34
回复 12# cjiabing
仔细观察了下,可以直接在TXT上生成手机可以“扫一扫”的真正二维码!~
第一步:将生成的“二维码”复制到记事本;
第二步:将“白色空格”全部替换成“黑”字;
第三步:将“黑色方块”全部替换成空格——一个黑色方块等于两个空格!
第四步:将“黑”替换成“黑色方块”。
一个标准的二维码图标是不是出来了?!~
原因是前面黑白颠倒了,调整过来之后,拿出你的手机来试一试吧!~
楼主修正下吧,直接在TXT上生成!~
作者: neorobin 时间: 2014-11-16 10:26
回复 13# cjiabing
将第 2 行的 REM 去掉, 即可通过写注册表的方式把控制台字体尺寸设置为 8X8 像素, 二维码图形就成为正方形了.
QR code 标准中要求单元模块及整个二维码图形是正方形, 实际扫描时, 由于印刷表面不平整, 以及扫描镜头轴线不与图形中心垂线相重合, 都会造成不同程度的形变失真.
但对于优秀的解码器而言, 这些失真在较大程度上都是可以克服的, 甚至原始图形是长和宽相差较大的矩形, 也能正确解码.
所知比较优秀的解码器有 Qrafter Pro, RedLaser, 以及 ZXing 项目.
"A dark module is a binary one and a light module is a binary zero."
标准中要求二进制位值为 1 的模块为深色, 为 0 的模块为浅色, 而不是必须为黑白两种颜色.- color 0F & echo;
- set "BLACK= " & set "WHITE=%ASCII219%"
复制代码
以上是 paint 过程中的两行代码, 修改 color 语句 或者 把 BLACK 和 WHITE 两个变量的值互换都可以实现图形反相, 如果这两个同时都修改了, 就成了二次反相, 就还原了.
在记事本中, 最快速的反相就是把文本全选.
作者: cjiabing 时间: 2014-11-16 20:05
回复 14# neorobin
原来早有机关在里面!~原理和代码太专业了,看不懂!~
只想用来玩玩,输入几个字符,你给我搞一个二维码出来直接用手机扫一扫就可以了,其他多余的东西就不想看了!~
哈哈哈!~谢谢分享!~
作者: qzwqzw 时间: 2014-11-28 16:28
拜读了大作
看来是多年来心血的结晶
仅提供几点建议
一是可以支持从文件中读取字符串
这样可以处理多行文本
二是使用独立cmd窗口显示QRCode
这样可以灵活控制QRCode的显示样式
三是处理UTF8编码的编码
可以考虑使用debug -d转换为hex text
另外最后一个小建议
把变量BLACK与WHITE改个名字
比如BIT0与BIT1之类
避免阅读上的麻烦
本来想自己改改
后来想想调试太累
只有放弃
作者: MCRGZN 时间: 2015-8-13 23:08
不错不错不错不错不错
作者: 老刘1号 时间: 2017-4-23 13:54
本帖最后由 老刘1号 于 2017-4-23 14:12 编辑
回复 16# qzwqzw
可以支持汉字了,自动转UTF-8
作者: Echo11 时间: 2022-9-30 13:40
2022年到此一游。
一、win11- Input data:http://www.bathome.net/
- Choose a error correct level (L/M/Q/H):H
- Choose a mask pattern between 0 and 7 :7
-
- QRCode.makeCode
-
- data=http://www.bathome.net/
- errorCorrectLevel=2
- maskPattern=7
- TypeNumber=3
- oQRCodeModel.dataList=687474703A2F2F7777772E626174686F6D652E6E65742F
- QRCodeModel.setupPositionProbePattern
- QRCodeModel.setupPositionAdjustPattern
- QRCodeModel.setupTimingPattern
- QRCodeModel.setupTypeInfo
- COLUMN: -1/28
-
-
- ███████████████████████████████
- █ █ █ ██ █ █ █ █
- █ █████ █ █ █ █ █ █ █ █████ █
- █ █ █ ████ ███ █ █ █ █
- █ █ █ █ ███ █████ ███ █ █ █
- █ █ █ █ █ ████ █ █ █ █ █
- █ █████ █ ██ ██ █ ██ █████ █
- █ █ █ █ █ █ █ █ █ █
- ██████████ ████ █ ██ █████████
- ████ ██ ██ ██ █ █ █████ █ █
- █ █████ █ █ ████ ████ █
- ███ ██ █ █ ███ █ ██
- ███ █ █ █ █████ ██ ██ ██
- ██ █ █ █ ████ ██ ███ ███████
- ██ █ ███ █ ██ ██ █ █ ████
- █████ ██ █████ ██ █ █ ███ █
- █ █ █ █ █ ██ █ ███ █████
- █ █ █ ████ █ ████████
- ██ █████ ██ ███ ██ █ █ █
- █ █ █ █ █ ███ █ ███ █ █ █
- ███ ██ █ ███ ██ ███ ████
- █ ██ █ ██ █ █ █ █
- ████████████ █ █ █ ███ ██ █
- █ ██ █ █ █ ██ █ █ ██
- █ █████ ██ ████ █ ███ █ █
- █ █ █ ██ ███ ██████ ██ █
- █ █ █ █ █ ███ █ █ █ █
- █ █ █ ██ █ ██ █ █ █ █ █ █
- █ █████ ███ ████ █ █ ███ ██
- █ ██ █ █ ██ █ █ █ ██
- ███████████████████████████████
-
- Input data:
复制代码
生成的二维码不能直接扫。
复制到notepad更不行,win11的notepad和win10以前的不一样了。不测试了。
复制到notepad++,一个黑框用两个黑框替换、一个空格用两个空格替换,得到的二维码微信可扫,手机X浏览器扫码插件扫码不给力,扫不出来。- ██████████████████████████████████████████████████████████████
- ██ ██ ██ ████ ██ ██ ██ ██
- ██ ██████████ ██ ██ ██ ██ ██ ██ ██ ██████████ ██
- ██ ██ ██ ████████ ██████ ██ ██ ██ ██
- ██ ██ ██ ██ ██████ ██████████ ██████ ██ ██ ██
- ██ ██ ██ ██ ██ ████████ ██ ██ ██ ██ ██
- ██ ██████████ ██ ████ ████ ██ ████ ██████████ ██
- ██ ██ ██ ██ ██ ██ ██ ██ ██ ██
- ████████████████████ ████████ ██ ████ ██████████████████
- ████████ ████ ████ ████ ██ ██ ██████████ ██ ██
- ██ ██████████ ██ ██ ████████ ████████ ██
- ██████ ████ ██ ██ ██████ ██ ████
- ██████ ██ ██ ██ ██████████ ████ ████ ████
- ████ ██ ██ ██ ████████ ████ ██████ ██████████████
- ████ ██ ██████ ██ ████ ████ ██ ██ ████████
- ██████████ ████ ██████████ ████ ██ ██ ██████ ██
- ██ ██ ██ ██ ██ ████ ██ ██████ ██████████
- ██ ██ ██ ████████ ██ ████████████████
- ████ ██████████ ████ ██████ ████ ██ ██ ██
- ██ ██ ██ ██ ██ ██████ ██ ██████ ██ ██ ██
- ██████ ████ ██ ██████ ████ ██████ ████████
- ██ ████ ██ ████ ██ ██ ██ ██
- ████████████████████████ ██ ██ ██ ██████ ████ ██
- ██ ████ ██ ██ ██ ████ ██ ██ ████
- ██ ██████████ ████ ████████ ██ ██████ ██ ██
- ██ ██ ██ ████ ██████ ████████████ ████ ██
- ██ ██ ██ ██ ██ ██████ ██ ██ ██ ██
- ██ ██ ██ ████ ██ ████ ██ ██ ██ ██ ██ ██
- ██ ██████████ ██████ ████████ ██ ██ ██████ ████
- ██ ████ ██ ██ ████ ██ ██ ██ ████
- ██████████████████████████████████████████████████████████████
复制代码
二、win7x64
win7下直接复制到记事本,参考12#的方法,一个空格用两个空格替换。- ███████████████████████████████
- █ █ █ ██ █ █ █ █
- █ █████ █ █ █ █ █ █ █ █████ █
- █ █ █ ████ ███ █ █ █ █
- █ █ █ █ ███ █████ ███ █ █ █
- █ █ █ █ █ ████ █ █ █ █ █
- █ █████ █ ██ ██ █ ██ █████ █
- █ █ █ █ █ █ █ █ █ █
- ██████████ ████ █ ██ █████████
- ████ ██ ██ ██ █ █ █████ █ █
- █ █████ █ █ ████ ████ █
- ███ ██ █ █ ███ █ ██
- ███ █ █ █ █████ ██ ██ ██
- ██ █ █ █ ████ ██ ███ ███████
- ██ █ ███ █ ██ ██ █ █ ████
- █████ ██ █████ ██ █ █ ███ █
- █ █ █ █ █ ██ █ ███ █████
- █ █ █ ████ █ ████████
- ██ █████ ██ ███ ██ █ █ █
- █ █ █ █ █ ███ █ ███ █ █ █
- ███ ██ █ ███ ██ ███ ████
- █ ██ █ ██ █ █ █ █
- ████████████ █ █ █ ███ ██ █
- █ ██ █ █ █ ██ █ █ ██
- █ █████ ██ ████ █ ███ █ █
- █ █ █ ██ ███ ██████ ██ █
- █ █ █ █ █ ███ █ █ █ █
- █ █ █ ██ █ ██ █ █ █ █ █ █
- █ █████ ███ ████ █ █ ███ ██
- █ ██ █ █ ██ █ █ █ ██
- ███████████████████████████████
复制代码
用微信可扫,全选变色后,微信依然可扫。
用X浏览器插件,直接扫不成功,全选变色后,可扫。
三、以上仅测试玩玩,纯bat有局限性,实际有需求还是搭配第三方命令行QR工具简单直接,或者用js。
四、最后膜拜下楼主
欢迎光临 批处理之家 (http://bbs.bathome.net/) |
Powered by Discuz! 7.2 |