[原创] 使用VBS禁用、启动USB存储设备

yu2n

翻出一个老脚本……

USB存储设备控制 By Yu2n
XP系统测试通过，需要管理员权限。
在下次插拔设备时生效，无须重启。

'USB_Stock_Block.vbs
'===========================================================================================
CheckOS         ' 检查操作系统版本
CheckMeState    ' 检查程序运行状态
main            ' 执行主程序

'===========================================================================================
'主函数
Sub main()
	Dim wso, windir, EnableUSB
	Set wso = CreateObject("WScript.Shell")
	Set objNetwork = CreateObject("wscript.network")
		strComputer = objNetwork.ComputerName
		
	If wso.Popup(VbCrLf & "禁用 USB 存储设备，请按“确定”"& VbCrLf &  _
				VbCrLf & "启用 USB 存储设备，请按“取消”     (6秒后自动取消)" _
				, 6, "USB 存储设备控制 - 主菜单", 48+4096+1) = 1 Then
		EnableUSB = 0
	Else
		EnableUSB = 1
	End If
	
	If Exist( "C:\windows\system32\cmd.exe" ) Then windir = "windows"
	If Exist( "C:\winnt\system32\cmd.exe" ) Then windir = "winnt"

	If EnableUSB = 1 Then
		wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\WriteProtect","1","REG_DWORD" '禁止写入
		wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start","3","REG_DWORD"                     '启用USBStor
		
		Move "C:\" & windir & "\inf\usbstor.pnf_" , "C:\" & windir & "\inf\usbstor.pnf"
		Move "C:\" & windir & "\inf\usbstor.inf_" , "C:\" & windir & "\inf\usbstor.inf"
		Move "C:\" & windir & "\system32\drivers\usbstor.sys_" , "C:\" & windir & "\system32\drivers\usbstor.sys"
		
		If (Not Exist( "C:\" & windir & "\inf\usbstor.pnf_" )) And (regKeyRead( "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start" ) = 3 ) Then
			wso.Popup VbCrLf & "启用 USB 存储设备成功。　　　　", 5, "USB 存储设备控制 - 操作完成", 64+4096
		Else
			wso.Popup VbCrLf & "启用 USB 存储设备失败。　　　　", 5, "USB 存储设备控制 - 操作完成", 16+4096
		End If
	Else
		wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\WriteProtect","1","REG_DWORD" '禁止写入
		wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start","4","REG_DWORD"                     '禁用用USBStor
		
		Move "C:\" & windir & "\inf\usbstor.pnf" , "C:\" & windir & "\inf\usbstor.pnf_"
		Move "C:\" & windir & "\inf\usbstor.inf" , "C:\" & windir & "\inf\usbstor.inf_"
		Move "C:\" & windir & "\system32\drivers\usbstor.sys" , "C:\" & windir & "\system32\drivers\usbstor.sys_"
		
		If (Not Exist( "C:\" & windir & "\inf\usbstor.pnf" )) And (regKeyRead( "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start" ) = 4 ) Then
			wso.Popup VbCrLf & "禁用 USB 存储设备成功。　　　　", 5, "USB 存储设备控制 - 操作完成", 64+4096
		Else
			wso.Popup VbCrLf & "禁用 USB 存储设备失败。　　　　", 5, "USB 存储设备控制 - 操作完成", 16+4096
		End If
	End if
		
	Set wso = Nothing
End Sub

'===========================================================================================
'小函数
Function Exist( strPath )
	'On Error Resume Next
	Set fso = CreateObject("Scripting.FileSystemObject")
	If ((fso.FolderExists( strPath )) Or (fso.FileExists( strPath ))) then
		Exist = True
	Else
		Exist = False
	End if
	Set fso = Nothing
End Function
Sub Move( strSource, strDestination )
	On Error Resume Next
	If Exist( strSource ) Then
		Set fso = CreateObject("Scripting.FileSystemObject")
		If (fso.FileExists(strSource)) Then fso.MoveFile strSource, strDestination
		If (fso.FolderExists(strSource)) Then fso.MoveFolder strSource, strDestination
		Set fso = Nothing
	Else
		WarningInfo "警告", "找不到 " & strSource & " 文件！", 2
	End If
	If Not Exist( strDestination ) Then WarningInfo "警告", "移动失败，无法移动 " & VbCrLf & strSource & " 至" & VbCrLf & strDestination, 2
End Sub
Function regKeyRead( strKey )
	Set wso = CreateObject("WScript.Shell")
	regKeyRead = wso.RegRead( strKey )    'strKey = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\DocTip"
	Set wso = Nothing
End Function

'===========================================================================================
'是否重复运行
Sub CheckMeState()
	If IsRun( WScript.ScriptFullName ) Then
		Set wso = CreateObject("WScript.Shell")
		If wso.Popup("程序已运行，请不要重复运行本程序！" & VbCrLf & VbCrLf & _
							"退出已运行程序，请按“确定”，否则请按“取消”。(3秒后自动取消)" _
							, 3, "警告", 1) = 1 Then
			KillMeAllRun
		End If
		Set wso = Nothing
		'WarningInfo "警告：", "程序已运行，请不要重复运行本程序！！", 1
		WScript.Quit
	End If
End Sub
' 检测是否重复运行
Function IsRun(appPath)
	IsRun=False
	For Each ps in GetObject("winmgmts:\\.\root\cimv2:win32_process").instances_
		'IF Lcase(ps.name)="mshta.exe" Then
		IF Lcase(ps.name)="wscript.exe" Then
			IF instr(Lcase(ps.CommandLine),Lcase(appPath)) Then i=i+1
		End IF
	next
	if i>1 then
		IsRun=True
	end if
End Function
'终止自身
Function KillMeAllRun()
	Dim MeAllPid
	Set pid = Getobject("winmgmts:\\.").InstancesOf("Win32_Process")
	For Each ps In pid
		'if LCase(ps.name) = LCase("mshta.exe") then
		IF Lcase(ps.name)="wscript.exe" Or Lcase(ps.name)="cscript.exe"Then
			IF instr(Lcase(ps.CommandLine),Lcase(WScript.ScriptFullName)) Then MeAllPid = MeAllPid & "/PID " & ps.ProcessID & " "
		end if
	next
	Set wso = CreateObject("WScript.Shell")
	wso.Run "TASKKILL " & MeAllPid & " /F /T", 0, False
	Set wso = Nothing
	Set pid = Nothing
End Function

'===========================================================================================
'检查操作系统版本
Sub CheckOS()
	Dim os_ver
	os_ver = GetSystemVersion
	If os_ver >= 60 Or os_ver <= 50 Then
		Msgbox "不支持该操作系统！　　　　", 48+4096, "警告"
		WScript.Quit    ' 退出程序
	End If
End Sub
'取得操作系统版本
Function GetSystemVersion()
	Dim os_obj, os_version, os_version_arr
	Set os_obj = GetObject("winmgmts:").InstancesOf("Win32_OperatingSystem")
	For Each os_info In os_obj
		os_version = os_info.Version
		If os_version <> "" Then Exit For
	Next
	Set os_obj = Nothing
	os_version_arr = Split( os_info.Version, ".")
	GetSystemVersion = Cint( os_version_arr( 0 ) & os_version_arr( 1 ) )
End Function
复制代码

locoman

谢谢分享，收藏学习！@

omoe

学习了，谢谢，正好需要这个

437153

来顶贴学习。